Alumina Formation on Pure Aluminum via PEO Process in Electrolytes with Different Silicate-Aluminate Ratios
ITU Journal of Metallurgy and Materials Engineering · 2026
DOI: 10.65774/itummej.1807174 ↗Kurz gefasst
Fachartikel in der Zeitschrift ITU Journal of Metallurgy and Materials Engineering, 2026. Verfasst von Emre Özbiçerler und 6 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben.
Abstract (Originalsprache)
This study systematically investigates the effect of electrolytes with varying silicate–aluminate ratios on the microstructure, phase composition, coating thickness, and surface roughness of aluminum coatings synthesized via the PEO process on pure Al. The coatings primarily consist of mullite (Al6Si2O13), ɣ-Al2O3 and α-Al2O3 phases. Increasing the aluminate content promoted α-Al2O3 formation and a higher number of smaller discharge channels, while higher silicate content favored mullite formation. Coating thickness increased with higher silicate concentrations, whereas surface roughness remained relatively constant across different electrolyte compositions.
Zitieren
APA
Özbiçerler, E., Özbiçerler, G., Cengiz, S., Azaklı, Y., Coşan, K. A., Tarakçı, M., & Gencer, Y. (2026). Alumina Formation on Pure Aluminum via PEO Process in Electrolytes with Different Silicate-Aluminate Ratios. ITU Journal of Metallurgy and Materials Engineering. https://doi.org/10.65774/itummej.1807174
Vancouver
Özbiçerler E, Özbiçerler G, Cengiz S, Azaklı Y, Coşan KA, Tarakçı M, et al. Alumina Formation on Pure Aluminum via PEO Process in Electrolytes with Different Silicate-Aluminate Ratios. ITU Journal of Metallurgy and Materials Engineering. 2026. doi:10.65774/itummej.1807174
BibTeX
@article{zbierler2026,
author = {Özbiçerler, Emre and Özbiçerler, Gülçin and Cengiz, Sezgin and Azaklı, Yunus and Coşan, Kral Ali and Tarakçı, Mehmet and Gencer, Yücel},
title = {Alumina Formation on Pure Aluminum via PEO Process in Electrolytes with Different Silicate-Aluminate Ratios},
journal = {ITU Journal of Metallurgy and Materials Engineering},
year = {2026},
doi = {10.65774/itummej.1807174}
}
EUVIMED