EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on the Effect of Blend Proportion on Physical Parameters of Ring Spun Polyester/Cotton Blend Yarn

Alhayat Getu TEMESGEN

Synthetic Ecological Engineering · 2025

DOI: 10.65773/see.1.1.79 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Synthetic Ecological Engineering, 2025. Verfasst von Alhayat Getu TEMESGEN. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examined the influence of polyester/cotton (P/C) blend ratios on the structural, physical, and mechanical properties of ring-spun yarns. Polyester and cotton fibers were blended at ratios of 30:70, 50:50, and 70:30 (P:C) and processed using ring spinning to evaluate the effects of blend composition on yarn performance. A comprehensive analysis was conducted on yarn unevenness, mass variation, twist behavior, hairiness, tensile strength, elongation, and fiber packing characteristics. The results revealed that increasing the proportion of polyester significantly enhanced yarn uniformity, with both optical unevenness and mass variation decreasing consistently across the blend ratios. A notable improvement in yarn regularity and reduced surface hairiness was observed when polyester content increased from 30% to 50%. The 70:30 P/C blend exhibited the most favorable performance, displaying the lowest hairiness values, the highest degree of fiber compactness, and superior yarn structural stability. Mechanical properties also improved substantially with higher polyester content. Tensile strength and elongation increased progressively, with the 70% polyester blend achieving the greatest breaking force and extensibility among all blends. These improvements were attributed to polyester’s higher fiber uniformity, greater tenacity, and stabilizing influence within the yarn cross-section. Generally, the study confirms that polyester content is a key determinant of yarn quality, influencing both mechanical robustness and surface characteristics. The findings identify the 70:30 polyester/cotton blend as the optimal ratio, delivering the best balance of structural regularity, reduced hairiness, and enhanced mechanical performance, making it highly suitable for high-quality woven and knitted textile applications.

Zitieren

APA

TEMESGEN, A. G. (2025). Experimental Study on the Effect of Blend Proportion on Physical Parameters of Ring Spun Polyester/Cotton Blend Yarn. Synthetic Ecological Engineering. https://doi.org/10.65773/see.1.1.79

Vancouver

TEMESGEN AG. Experimental Study on the Effect of Blend Proportion on Physical Parameters of Ring Spun Polyester/Cotton Blend Yarn. Synthetic Ecological Engineering. 2025. doi:10.65773/see.1.1.79

BibTeX
@article{TEMESGEN2025,
  author = {TEMESGEN, Alhayat Getu},
  title = {Experimental Study on the Effect of Blend Proportion on Physical Parameters of Ring Spun Polyester/Cotton Blend Yarn},
  journal = {Synthetic Ecological Engineering},
  year = {2025},
  doi = {10.65773/see.1.1.79}
}
Kostenlos starten →