Production Proposal of Globoid Worm Gears with Module 5
Acta Mechanica et Automatica · 25.06.2026 · 20 (2/2026) · 463
DOI: 10.65731/ama/2026-0046 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Mechanica et Automatica, online erschienen am 25.06.2026. Verfasst von Marek Makúch und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This research work deals with the production of globoid worm gears. The production of worm wheels and the measurement of worm wheels are described. The aim of this research work is to design globoid gearing on the outer ring of the bearing 9E-1B22-0226-1372-H15 according to the technological procedure. It can be stated that the production is economically advantageous, and the correctness of the production was evaluated by its measurements. The produced globoid wheels are measured by two methods. The imprint measurement is performed on a machine that works on the principle of rolling the screw with the wheel.
Zitieren
APA
Makúch, M., Krmela, J., Krmelová, V., Kubiak, M., Fusková, M., & Artyukhova, N. (2026). Production Proposal of Globoid Worm Gears with Module 5. Acta Mechanica et Automatica, 20(2/2026), 463. https://doi.org/10.65731/ama/2026-0046
Vancouver
Makúch M, Krmela J, Krmelová V, Kubiak M, Fusková M, Artyukhova N. Production Proposal of Globoid Worm Gears with Module 5. Acta Mechanica et Automatica. 2026;20(2/2026):463. doi:10.65731/ama/2026-0046
BibTeX
@article{Makch2026,
author = {Makúch, Marek and Krmela, Jan and Krmelová, Vladimíra and Kubiak, Marcin and Fusková, Martina and Artyukhova, Nadiia},
title = {Production Proposal of Globoid Worm Gears with Module 5},
journal = {Acta Mechanica et Automatica},
year = {2026},
volume = {20},
number = {2/2026},
pages = {463},
doi = {10.65731/ama/2026-0046}
}
EUVIMED