EFFECT OF ERBIUM ON ANODIC CHARACTERISTICS OF Zn0.5Al ALLOY IN CORROSIVE HCl ENVIRONMENT
“Polytechnic Bulletin” series “Engineering Research” · 31.03.2026
DOI: 10.65599/eng6445 ↗Kurz gefasst
Fachartikel in der Zeitschrift “Polytechnic Bulletin” series “Engineering Research”, online erschienen am 31.03.2026. Verfasst von Umed Jobirov und 2 weiteren Autor:innen.
Abstract (Originalsprache)
The article is devoted to the study of the anodic behavior of the Zn0.5Al alloy doped with erbium. An acidic medium (HCl) was chosen as the corrosion medium for the study. By adding erbium (0.01÷1.0%) to the initial alloy, alloy samples of different compositions were obtained. The anodic behavior of these alloys was studied using the potentiostatical method. With increasing HCl concentration (0.001÷0.1N) in an acidic environment, the corrosion rate of the alloys increases. When alloying the Zn0.5Al alloy with erbium, its anticorrosive properties change. Erbium additives (0.01÷0.1%) reduce the corrosion rate of the Zn0.5Al alloy by 2–3 times.
Zitieren
APA
Jobirov, U., Ganiev, I., & Obidov, Z. (2026). EFFECT OF ERBIUM ON ANODIC CHARACTERISTICS OF Zn0.5Al ALLOY IN CORROSIVE HCl ENVIRONMENT. “Polytechnic Bulletin” series “Engineering Research”. https://doi.org/10.65599/eng6445
Vancouver
Jobirov U, Ganiev I, Obidov Z. EFFECT OF ERBIUM ON ANODIC CHARACTERISTICS OF Zn0.5Al ALLOY IN CORROSIVE HCl ENVIRONMENT. “Polytechnic Bulletin” series “Engineering Research”. 2026. doi:10.65599/eng6445
BibTeX
@article{Jobirov2026,
author = {Jobirov, Umed and Ganiev, Izatullo and Obidov, Ziyodullo},
title = {EFFECT OF ERBIUM ON ANODIC CHARACTERISTICS OF Zn0.5Al ALLOY IN CORROSIVE HCl ENVIRONMENT},
journal = {“Polytechnic Bulletin” series “Engineering Research”},
year = {2026},
doi = {10.65599/eng6445}
}
EUVIMED