ANODIC BEHAVIOR OF TIN BABBIT ALLOYS SnSb11Cu6 WITH LITHIUM IN A NACL SOLUTION MEDIUM
“Polytechnic Bulletin” series “Engineering Research” · 30.06.2026
DOI: 10.65599/eng6302 ↗Kurz gefasst
Fachartikel in der Zeitschrift “Polytechnic Bulletin” series “Engineering Research”, online erschienen am 30.06.2026. Verfasst von Izatullo Ganiev und 4 weiteren Autor:innen.
Abstract (Originalsprache)
The electrochemical characteristics of lithium-alloyed tin babbitt SnSb11Cu6 were investigated using the potentiostatic polarization technique at a potential sweep rate of 2 mV/s in a NaCl electrolyte. The results demonstrate that increasing the lithium content leads to a positive shift in the free corrosion potential as well as in the repassivation and pitting potentials relative to the base alloy. At the same time, an increase in the concentration of chloride ions in the solution causes these potentials to shift toward more negative values. It was also established that lithium alloying decreases the corrosion rate of the SnSb11Cu6 tin babbitt in NaCl solution by approximately 15%.
Zitieren
APA
Ganiev, I., Saidov, S., Makhmadizoda, M., Okilov, S., & Idiev, I. (2026). ANODIC BEHAVIOR OF TIN BABBIT ALLOYS SnSb11Cu6 WITH LITHIUM IN A NACL SOLUTION MEDIUM. “Polytechnic Bulletin” series “Engineering Research”. https://doi.org/10.65599/eng6302
Vancouver
Ganiev I, Saidov S, Makhmadizoda M, Okilov S, Idiev I. ANODIC BEHAVIOR OF TIN BABBIT ALLOYS SnSb11Cu6 WITH LITHIUM IN A NACL SOLUTION MEDIUM. “Polytechnic Bulletin” series “Engineering Research”. 2026. doi:10.65599/eng6302
BibTeX
@article{Ganiev2026,
author = {Ganiev, Izatullo and Saidov, Saidkhoja and Makhmadizoda, Murodali and Okilov, Shakhrom and Idiev, Idikhudja},
title = {ANODIC BEHAVIOR OF TIN BABBIT ALLOYS SnSb11Cu6 WITH LITHIUM IN A NACL SOLUTION MEDIUM},
journal = {“Polytechnic Bulletin” series “Engineering Research”},
year = {2026},
doi = {10.65599/eng6302}
}
EUVIMED