EUVIMEDEUVIMED entdecken
Crossref

RESEARCH OF HARDNESS AND STRENGTH OF Zn0.5Al ALLOY, DOPED WITH SCANDIUM, YTTRIUM AND ERBIUM

Umed Jobirov, Izatullo Ganiev, Ziyodullo Obidov

“Polytechnic Bulletin” series “Engineering Research” · 31.03.2026

DOI: 10.65599/eng6057 ↗

Kurz gefasst

Fachartikel in der Zeitschrift “Polytechnic Bulletin” series “Engineering Research”, online erschienen am 31.03.2026. Verfasst von Umed Jobirov und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The hardness and strength of Zn0.5Al alloy and Zn0.5Al-Sc(Y, Er) alloys with different compositions were studied separately, using the alloying components scandium, yttrium, and erbium. All alloys with different compositions exhibited increases and decreases in hardness, with the change being positively and effectively determined compared to the hardness of Zn0.5Al alloy. The behavior of the metallic components of the alloy determines that the influence of scandium and yttrium on increasing the hardness and strength of the base alloy is greater than the influence of erbium on these properties of the alloy. The largest additions (0.5 and 1.0%) of these alloying components showed a slight decrease in hardness and strength compared to the smallest additions (0.01÷0.1%), which means that, taken together, the experimentally established values of these quantities are significantly higher than their values for the Zn0.5Al alloy.

Zitieren

APA

Jobirov, U., Ganiev, I., & Obidov, Z. (2026). RESEARCH OF HARDNESS AND STRENGTH OF Zn0.5Al ALLOY, DOPED WITH SCANDIUM, YTTRIUM AND ERBIUM. “Polytechnic Bulletin” series “Engineering Research”. https://doi.org/10.65599/eng6057

Vancouver

Jobirov U, Ganiev I, Obidov Z. RESEARCH OF HARDNESS AND STRENGTH OF Zn0.5Al ALLOY, DOPED WITH SCANDIUM, YTTRIUM AND ERBIUM. “Polytechnic Bulletin” series “Engineering Research”. 2026. doi:10.65599/eng6057

BibTeX
@article{Jobirov2026,
  author = {Jobirov, Umed and Ganiev, Izatullo and Obidov, Ziyodullo},
  title = {RESEARCH OF HARDNESS AND STRENGTH OF Zn0.5Al ALLOY, DOPED WITH SCANDIUM, YTTRIUM AND ERBIUM},
  journal = {“Polytechnic Bulletin” series “Engineering Research”},
  year = {2026},
  doi = {10.65599/eng6057}
}
Kostenlos starten →