EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Response Performance Optimization in the Turning Process of Low-Carbon Steel Alloys Using Response Surface Methodology and Desirability Function Approach

Mustafa Hakoumah, Salem Beleid, Abubkr Mhamed Hemer, Benur Matug, Abdelnasir Shtewi

مجلة البحوث الأكاديمية · 2026

DOI: 10.65540/hfqpts81 ↗

Kurz gefasst

Fachartikel in der Zeitschrift مجلة البحوث الأكاديمية, 2026. Verfasst von Mustafa Hakoumah und 4 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present investigation, Response Surface Methodology (RSM) in conjunction with the Desirability Function Approach (DFA) was utilized to ascertain the optimal values for cutting parameters—namely, cutting speed, feed rate, and depth of cut—with the objective of minimizing surface roughness and maximizing the Material Removal Rate (MRR). A Face-Centered Central Composite Design (FCCD) was implemented to systematically and effectively facilitate the experimental procedures. Second-order mathematical models for both MRR and surface roughness (Ra) were formulated based on the empirical data obtained from the experiments. The validity of these mathematical constructs was corroborated through (F-tests), and their adequacy was meticulously assessed utilizing Analysis of Variance (ANOVA) pertinent to the specified responses. Subsequently, the cutting parameters were optimized employing the predictive models generated through RSM, while a comprehensive multi-response optimization was executed via the desirability-based DFA. The findings indicated that the optimal values for the cutting parameters—resulting in the minimal surface roughness (1.8934 µm) and the maximal material removal rate (11,459 mm³/min)—were attained at a spindle speed of 1120 rpm, a feed rate of 0.20 mm/rev, and a depth of cut of 0.6788 mm. These results substantiate the efficacy of the proposed methodology in augmenting the machining performance of low-carbon steel alloys.

Zitieren

APA

Hakoumah, M., Beleid, S., Hemer, A. M., Matug, B., & Shtewi, A. (2026). Multi-Response Performance Optimization in the Turning Process of Low-Carbon Steel Alloys Using Response Surface Methodology and Desirability Function Approach. مجلة البحوث الأكاديمية. https://doi.org/10.65540/hfqpts81

Vancouver

Hakoumah M, Beleid S, Hemer AM, Matug B, Shtewi A. Multi-Response Performance Optimization in the Turning Process of Low-Carbon Steel Alloys Using Response Surface Methodology and Desirability Function Approach. مجلة البحوث الأكاديمية. 2026. doi:10.65540/hfqpts81

BibTeX
@article{Hakoumah2026,
  author = {Hakoumah, Mustafa and Beleid, Salem and Hemer, Abubkr Mhamed and Matug, Benur and Shtewi, Abdelnasir},
  title = {Multi-Response Performance Optimization in the Turning Process of Low-Carbon Steel Alloys Using Response Surface Methodology and Desirability Function Approach},
  journal = {مجلة البحوث الأكاديمية},
  year = {2026},
  doi = {10.65540/hfqpts81}
}
Kostenlos starten →