EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Investigation and Optimization of MIG Welding Parameters for IS 2062 E250A Mild Steel Using Taguchi Design of Experiments

Tamal Das

Journal of Mechanical Engineering Advancements · 16.02.2026 · 2 (3) · 23-28

DOI: 10.65525/jmea.v2i3.31 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Engineering Advancements, online erschienen am 16.02.2026. Verfasst von Tamal Das. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal Inert Gas (MIG) welding is one of the most widely used arc welding processes in fabrication industries due to its high productivity, ease of automation, and good weld quality. However, weld bead geometry and joint performance are strongly influenced by process parameters such as welding current, arc voltage, welding speed, and heat input. In this study, an experimental investigation was carried out to analyze and optimize MIG welding parameters for IS 2062 E250A mild steel plates using the Taguchi Design of Experiments (DOE) approach. Welding current, arc voltage, and welding speed were selected as control parameters, while depth of penetration and weld width were considered as key output responses. An L9 orthogonal array was employed to minimize experimental runs. Signal-to-Noise (S/N) ratio analysis and Analysis of Variance (ANOVA) were used to identify the most significant parameters affecting weld bead geometry. The results reveal that welding current and voltage have dominant influence on penetration and bead width, while welding speed primarily affects heat input and shape factor. The optimized parameter combination yields improved penetration depth and stable weld bead geometry, demonstrating the effectiveness of Taguchi optimization for MIG welding process control.

Zitieren

APA

Das, T. (2026). Investigation and Optimization of MIG Welding Parameters for IS 2062 E250A Mild Steel Using Taguchi Design of Experiments. Journal of Mechanical Engineering Advancements, 2(3), 23-28. https://doi.org/10.65525/jmea.v2i3.31

Vancouver

Das T. Investigation and Optimization of MIG Welding Parameters for IS 2062 E250A Mild Steel Using Taguchi Design of Experiments. Journal of Mechanical Engineering Advancements. 2026;2(3):23-28. doi:10.65525/jmea.v2i3.31

BibTeX
@article{Das2026,
  author = {Das, Tamal},
  title = {Investigation and Optimization of MIG Welding Parameters for IS 2062 E250A Mild Steel Using Taguchi Design of Experiments},
  journal = {Journal of Mechanical Engineering Advancements},
  year = {2026},
  volume = {2},
  number = {3},
  pages = {23--28},
  doi = {10.65525/jmea.v2i3.31}
}
Kostenlos starten →