EUVIMEDEUVIMED entdecken
Crossref

A Review Fabrication of Self-Inflating Tires and Pressure Monitoring Systems

Pravin Thakre, Rahul Jangid, Raj Batho, Darshan Bhadke, Tikeshwar Meshram, Ketan Tonpe

International Journal on Theoretical and Applied Research in Mechanical Engineering · 30.05.2025 · 14 (1) · 1-4

DOI: 10.65521/ijtarme.v14i1.512 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal on Theoretical and Applied Research in Mechanical Engineering, online erschienen am 30.05.2025. Verfasst von Pravin Thakre und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the methods for self inflating tires. Nowadays every part of an automobile sector is getting automated. Automation relaxes a person to do manual work. Driven by studies that show that a drop in tire pressure by just a few PSI can result in the reduction of gas mileage, tire life, safety, and vehicle performance, we have developed an automatic, self-inflating tire system that ensures that tires are properly inflated at all times. Our design proposes and successfully implements the use of a portable compressor that will supply air to all four tires via hoses and a rotary joint fixed between the wheel spindle and wheel hub at each wheel. The rotary joints effectively allow air to be channeled to the tires without the tangling of hoses. With the recent oil price hikes and growing concern of environmental issues, this system addresses a potential improvement in gas mileage; tire wear reduction; and an increase in handling and tire performance in diverse conditions.

Zitieren

APA

Thakre, P., Jangid, R., Batho, R., Bhadke, D., Meshram, T., & Tonpe, K. (2025). A Review Fabrication of Self-Inflating Tires and Pressure Monitoring Systems. International Journal on Theoretical and Applied Research in Mechanical Engineering, 14(1), 1-4. https://doi.org/10.65521/ijtarme.v14i1.512

Vancouver

Thakre P, Jangid R, Batho R, Bhadke D, Meshram T, Tonpe K. A Review Fabrication of Self-Inflating Tires and Pressure Monitoring Systems. International Journal on Theoretical and Applied Research in Mechanical Engineering. 2025;14(1):1-4. doi:10.65521/ijtarme.v14i1.512

BibTeX
@article{Thakre2025,
  author = {Thakre, Pravin and Jangid, Rahul and Batho, Raj and Bhadke, Darshan and Meshram, Tikeshwar and Tonpe, Ketan},
  title = {A Review Fabrication of Self-Inflating Tires and Pressure Monitoring Systems},
  journal = {International Journal on Theoretical and Applied Research in Mechanical Engineering},
  year = {2025},
  volume = {14},
  number = {1},
  pages = {1--4},
  doi = {10.65521/ijtarme.v14i1.512}
}
Kostenlos starten →