Performance Evaluation of Hybrid Solar Air Heating Systems for Industrial Drying Applications
International Journal on Theoretical and Applied Research in Mechanical Engineering · 2021
DOI: 10.65521/ijtarme.v10i1.4421 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal on Theoretical and Applied Research in Mechanical Engineering, 2021. Verfasst von Khaldun Hathurusinghe.
Abstract (Originalsprache)
Industrial drying is a major consumer of low- and medium-temperature process heat, while conventional fuel-fired and electrical dryers are exposed to high operating cost and greenhouse-gas emissions. This methodology paper develops a structured performance-evaluation framework for a hybrid solar air-heating system intended for industrial drying. The proposed configuration combines a direct flat-plate solar air-heater field, an indirect solar-water loop coupled to thermal storage and an air heat exchanger, a controllable auxiliary heater, and partial exhaust-air recirculation. The evaluation uses energy balances, collector efficiency, solar fraction, drying efficiency, specific energy consumption, specific moisture extraction rate, temperature stability, and drying time as performance indicators. A representative pilot-industrial design case with an 80 m2 collector field, 1.0 kg/s process-air flow rate, 55 degC drying set point, and a 500 kg wet-product batch is used to demonstrate the method. Model-based results indicate that hybrid operation can maintain a more stable drying temperature than solar-only operation, reduce specific energy consumption relative to conventional auxiliary heating, and provide a useful solar contribution without sacrificing process continuity. The methodology is intended as a repeatable basis for comparing hybrid solar drying configurations before plant-scale investment and experimental validation
Zitieren
APA
Hathurusinghe, K. (2021). Performance Evaluation of Hybrid Solar Air Heating Systems for Industrial Drying Applications. International Journal on Theoretical and Applied Research in Mechanical Engineering. https://doi.org/10.65521/ijtarme.v10i1.4421
Vancouver
Hathurusinghe K. Performance Evaluation of Hybrid Solar Air Heating Systems for Industrial Drying Applications. International Journal on Theoretical and Applied Research in Mechanical Engineering. 2021. doi:10.65521/ijtarme.v10i1.4421
BibTeX
@article{Hathurusinghe2021,
author = {Hathurusinghe, Khaldun},
title = {Performance Evaluation of Hybrid Solar Air Heating Systems for Industrial Drying Applications},
journal = {International Journal on Theoretical and Applied Research in Mechanical Engineering},
year = {2021},
doi = {10.65521/ijtarme.v10i1.4421}
}
EUVIMED