EUVIMEDEUVIMED entdecken
Crossref

Design & Fabrication of Motorized Screw Jack Machine

Dhanraj R Raut, Aadarsh A Dabhade, Surajkumar Bind, Sukhendrakumar Dwivedi, Aayush Rahangdale

International Journal on Mechanical Engineering and Robotics · 30.05.2025 · 14 (1) · 9-10

DOI: 10.65521/ijmer.v14i1.504 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal on Mechanical Engineering and Robotics, online erschienen am 30.05.2025. Verfasst von Dhanraj R Raut und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A screw jack is Jackscrew is function by turning a lead screw. The maximum height of the jack Is adjusted by turning the lead screw. It can be done either manually or by Integrating an electric motor with it. This integration is our project. It is difficult part in the project is finding a minimum speed motor that is able to work at 12V. Due to this reason the battery output of an automobile is 12V, and-the electricity needed for the operation of the screw jack Is taken from this battery. Another problem will be regarding speed reduction. 12V motors usually operate at higher speeds, likely at 4000 rpm. So reducing this high rpm to the required lower rpm for the operation of screw jack without bulky accessories or power loss can be challenging. .It can be done In any type of jack cylindrical screw jack, bottle type screw jack and scissor type screw jack. In our project we use scissor screw jack which is applicable for operation.

Zitieren

APA

Raut, D. R., Dabhade, A. A., Bind, S., Dwivedi, S., & Rahangdale, A. (2025). Design & Fabrication of Motorized Screw Jack Machine. International Journal on Mechanical Engineering and Robotics, 14(1), 9-10. https://doi.org/10.65521/ijmer.v14i1.504

Vancouver

Raut DR, Dabhade AA, Bind S, Dwivedi S, Rahangdale A. Design & Fabrication of Motorized Screw Jack Machine. International Journal on Mechanical Engineering and Robotics. 2025;14(1):9-10. doi:10.65521/ijmer.v14i1.504

BibTeX
@article{Raut2025,
  author = {Raut, Dhanraj R and Dabhade, Aadarsh A and Bind, Surajkumar and Dwivedi, Sukhendrakumar and Rahangdale, Aayush},
  title = {Design & Fabrication of Motorized Screw Jack Machine},
  journal = {International Journal on Mechanical Engineering and Robotics},
  year = {2025},
  volume = {14},
  number = {1},
  pages = {9--10},
  doi = {10.65521/ijmer.v14i1.504}
}
Kostenlos starten →