Influence of sand-coated rubber shreds on the mechanical properties of concrete incorporating recycled conveyor belt waste Author
Indian Concrete Journal · 2026 · 100 (09) · 17-30
DOI: 10.65302/icj.2026.100092 ↗Kurz gefasst
Fachartikel in der Zeitschrift Indian Concrete Journal, 2026. Verfasst von Karthikeyan R und 3 weiteren Autor:innen.
Abstract (Originalsprache)
The increasing generation of waste rubber has become a major environmental challenge due to its non-biodegradable nature and increasing generation from industrial and commercial activities. Industrial conveyor belt rubber waste, generated in large quantities from coal power plants, has emerged as a potential sustainable material for concrete production by partially replacing coarse aggregate. However, the incorporation of rubber generally reduces the mechanical performance of concrete because of the weak interfacial bond between the rubber surface and the cement matrix. To overcome this limitation, various surface treatment techniques have been developed to enhance the bond between rubber particles and the cementitious matrix, thereby improving the performance of rubberized concrete. In the present study, the sand coating method was adopted to increase the surface roughness of rubber shreds and enhance their bonding with the cement matrix. The main objective was to evaluate the mechanical performance of rubberized concrete prepared with sand-coated rubber and without sand-coated rubber. Rubber shreds were incorporated at 2.5, 5, 7.5 and 10 % by mass as a replacement for coarse aggregate. A separate mix design was developed for each proportion, and slump tests were conducted to assess the workability of the concrete. Concrete specimens in the form of cubes, prisms and cylinders were cast for testing. Two specimen groups were prepared, one using rubber shreds without sand coating and the other using sand-coated rubber shreds. Strength tests were conducted on all specimens. The results demonstrated that concrete prepared with sand-coated rubber exhibited significant improvements in compressive strength, flexural strength, and modulus of Elasticity, bond strength, pullout strength and impact resistance when compared to concrete without sand-coated rubber. Regression models were developed to predict these properties based on the combination of rubber volume fraction, coarse aggregate, fine aggregate, cement and water cement ratio. The models closely aligned with experimental data, confirming their effectiveness for forecasting concrete performance. These findings validate the effectiveness of surface treatment in enhancing the performance of rubberized concrete and support the reuse of industrial rubber waste as an eco-friendly construction material.
Zitieren
APA
R, K., Kumar, P. P. S., Singh, S. B., & Suguna, K. (2026). Influence of sand-coated rubber shreds on the mechanical properties of concrete incorporating recycled conveyor belt waste Author. Indian Concrete Journal, 100(09), 17-30. https://doi.org/10.65302/icj.2026.100092
Vancouver
R K, Kumar PPS, Singh SB, Suguna K. Influence of sand-coated rubber shreds on the mechanical properties of concrete incorporating recycled conveyor belt waste Author. Indian Concrete Journal. 2026;100(09):17-30. doi:10.65302/icj.2026.100092
BibTeX
@article{R2026,
author = {R, Karthikeyan and Kumar, P. Praneet Sai and Singh, S. B and Suguna, K},
title = {Influence of sand-coated rubber shreds on the mechanical properties of concrete incorporating recycled conveyor belt waste Author},
journal = {Indian Concrete Journal},
year = {2026},
volume = {100},
number = {09},
pages = {17--30},
doi = {10.65302/icj.2026.100092}
}
EUVIMED