Automated determination of ground control points for base map production using UAV photogrammetry and Google Earth Engine
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi · 11.11.2026 · (Advanced Online Publication)
DOI: 10.65206/pajes.1967858 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, online erschienen am 11.11.2026. Verfasst von Emirhan Özdemir und 2 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben.
Abstract (Originalsprache)
Context—Unmanned Aerial Vehicle (UAV)-based photogrammetry provides high-resolution spatial data for a wide range of mapping applications. However, the appropriate planning and spatial distribution of Ground Control Points (GCPs) and Check Points (CPs) remain critical for achieving reliable photogrammetric results. Conventional GCP/CP planning generally requires field reconnaissance and expert assessment, which can be time-consuming and difficult in large or complex areas.Objective—This study aims to develop a Google Earth Engine (GEE)-based GCP/CP planning and decision-support tool that supports the preliminary, office-based planning of control and check points for UAV photogrammetric applications. The tool is designed to provide flexible candidate locations under different flight scenarios while allowing users to evaluate and modify the generated configurations according to project-specific conditions.Method—The proposed framework integrates topographic, vegetation, building, and road-network layers to provide complementary spatial information for GCP/CP planning. Users can define a Region of Interest (ROI) within Türkiye either by uploading a vector asset or by interactively drawing a polygon. A 50 m buffer around building footprints is applied as an exclusion criterion during automated candidate generation. RTK and non-RTK flight scenarios are handled using different candidate-generation strategies. In RTK-supported scenarios, the number of GCPs is determined according to an area-based rule, while non-RTK scenarios generate a denser set of candidate locations. CPs are generated independently to support photogrammetric accuracy assessment. A manual mode is also provided, allowing users to define GCPs and CPs according to field conditions and engineering judgment. Date-based randomization enables alternative candidate configurations to be generated through repeated executions.Results—The developed tool successfully generated alternative GCP/CP candidate configurations under RTK and non-RTK scenarios while incorporating the predefined spatial constraints. To evaluate the variability of the automatically generated configurations, the RTK-based procedure was repeated 50 times using the same ROI. The minimum GCP–GCP distance among the generated configurations ranged from 91.15 to 1965.49 m, while the minimum GCP–CP distance ranged from 120.29 to 1524.78 m. These results confirmed that the system does not produce a fixed-point arrangement but provides alternative candidate configurations that can be evaluated by the user. The manual mode enables users to independently define GCP and CP locations from scratch by evaluating the visualized spatial analysis layers according to field conditions and engineering judgment.Conclusion—The proposed GEE-based framework provides a flexible, repeatable, and spatially explicit GCP/CP planning and decision-support environment for UAV photogrammetric applications. Rather than determining universally optimal control-point locations or replacing field surveys, the tool provides preliminary candidate configurations and complementary spatial information to support expert decision-making before field deployment. Its cloud-based structure and user-interactive design enable the approach to be applied across user-defined areas within Türkiye and adapted to different project conditions.
Zitieren
APA
Özdemir, E., Çallı, R., & Şekertekin, A. (2026). Automated determination of ground control points for base map production using UAV photogrammetry and Google Earth Engine. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi. https://doi.org/10.65206/pajes.1967858
Vancouver
Özdemir E, Çallı R, Şekertekin A. Automated determination of ground control points for base map production using UAV photogrammetry and Google Earth Engine. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi. 2026. doi:10.65206/pajes.1967858
BibTeX
@article{zdemir2026,
author = {Özdemir, Emirhan and Çallı, Rüştü and Şekertekin, Aliihsan},
title = {Automated determination of ground control points for base map production using UAV photogrammetry and Google Earth Engine},
journal = {Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi},
year = {2026},
number = {Advanced Online Publication},
doi = {10.65206/pajes.1967858}
}
EUVIMED