EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Physicochemical Characterization of Microplastics in Refillable Water Gallon Containers

Hazel Ylagan, Alyssa Lorraine M. Somcio, Ma. Jeremy H. Sarmiento, Khaylie May C. San Juan, Jeizell S. Ronario, Kate Cyrene U. Mayo, Allana Dimple C. Francisco, Lira Angela V. Bolon, Mhica L. Marasigan, Carmi Loraine S. Sumiran

International Journal of Health & Business Analytics · 28.06.2026 · 2 (2)

DOI: 10.65166/jnrrwf32 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Health & Business Analytics, online erschienen am 28.06.2026. Verfasst von Hazel Ylagan und 9 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microplastic contamination in drinking water has become an emerging environmental health concern, particularly in communities that rely on refillable water gallon containers for household consumption. This study aimed to determine the presence, physical characteristics, and chemical composition of microplastics in drinking water collected from refillable water gallon containers used by selected households in Barangay 641, San Miguel, Manila. A descriptive-quantitative research design was employed. Twenty 250-mL water samples were collected and subjected to vacuum filtration using a 0.45 µm membrane filter. The retained particles were examined through USB digital microscopy and the Hot Needle Test to screen, classify, count, and measure suspected microplastics. Representative particles were further analyzed using Fourier Transform Infrared spectroscopy to identify probable polymer composition. Results showed that 12 out of 20 samples, or 60%, tested positive for microplastics. A total of 32 microplastic particles were detected, with an average of 1.6 particles per 250-mL sample. The particles were classified as fibers and microfibers, each accounting for 50% of the detected particles. Fibers ranged from 1.01 to 3.22 mm, while microfibers ranged from 0.27 to 0.95 mm. FTIR analysis identified the representative particles as probable polyamide based on characteristic absorption peaks. The findings provide baseline evidence of microplastic occurrence in refillable water gallon samples and support the need for improved monitoring, handling practices, and consumer safety assessment in refillable drinking-water systems.

Zitieren

APA

Ylagan, H., Somcio, A. L. M., Sarmiento, M. J. H., Juan, K. M. C. S., Ronario, J. S., Mayo, K. C. U., Francisco, A. D. C., Bolon, L. A. V., Marasigan, M. L., & Sumiran, C. L. S. (2026). Physicochemical Characterization of Microplastics in Refillable Water Gallon Containers. International Journal of Health & Business Analytics, 2(2). https://doi.org/10.65166/jnrrwf32

Vancouver

Ylagan H, Somcio ALM, Sarmiento MJH, Juan KMCS, Ronario JS, Mayo KCU, et al. Physicochemical Characterization of Microplastics in Refillable Water Gallon Containers. International Journal of Health & Business Analytics. 2026;2(2). doi:10.65166/jnrrwf32

BibTeX
@article{Ylagan2026,
  author = {Ylagan, Hazel and Somcio, Alyssa Lorraine M. and Sarmiento, Ma. Jeremy H. and Juan, Khaylie May C. San and Ronario, Jeizell S. and Mayo, Kate Cyrene U. and Francisco, Allana Dimple C. and Bolon, Lira Angela V. and Marasigan, Mhica L. and Sumiran, Carmi Loraine S.},
  title = {Physicochemical Characterization of Microplastics in Refillable Water Gallon Containers},
  journal = {International Journal of Health & Business Analytics},
  year = {2026},
  volume = {2},
  number = {2},
  doi = {10.65166/jnrrwf32}
}
Kostenlos starten →