Nghiên cứu tính toán, thiết kế và chế tạo máy cắt tia nước công suất nhỏ cho vật liệu mềm
Tạp chí Khoa học và Công nghệ Trường Đại học Công nghệ Đông Á · 14.10.2026 · 89-95
DOI: 10.65153/h528xt37 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tạp chí Khoa học và Công nghệ Trường Đại học Công nghệ Đông Á, online erschienen am 14.10.2026. Verfasst von Vũ Hùng Bùi und 4 weiteren Autor:innen.
Abstract (Originalsprache)
This study presents the calculation, design, and development of a low-power waterjet cutting system intended for processing soft materials such as foam, soft rubber, and synthetic leather. Based on an analysis of high-pressure waterjet formation and the mechanical characteristics of soft materials, the research determines the minimum required pressure and flow rate necessary to achieve effective cutting performance. A compact prototype system is subsequently designed and fabricated, consisting of a mini high-pressure pump, a small-diameter nozzle for jet concentration, and a precision guiding mechanism to ensure stable cutting trajectories. Computational fluid dynamics (CFD) simulations, combined with experimental validation, are conducted to evaluate the performance of the system. The results demonstrate that the proposed model is capable of generating a stable and sufficiently energetic waterjet to produce clean and consistent cutting surfaces with minimal deformation. The system shows strong potential for application in educational environments, laboratory-scale research, and small-scale manufacturing due to its cost-effectiveness and operational simplicity.
Zitieren
APA
Bùi, V. H., Bùi, V. H., Đỗ, T. H., Đỗ, Đ. L., & Dương, C. T. (2026). Nghiên cứu tính toán, thiết kế và chế tạo máy cắt tia nước công suất nhỏ cho vật liệu mềm. Tạp chí Khoa học và Công nghệ Trường Đại học Công nghệ Đông Á, 89-95. https://doi.org/10.65153/h528xt37
Vancouver
Bùi VH, Bùi VH, Đỗ TH, Đỗ ĐL, Dương CT. Nghiên cứu tính toán, thiết kế và chế tạo máy cắt tia nước công suất nhỏ cho vật liệu mềm. Tạp chí Khoa học và Công nghệ Trường Đại học Công nghệ Đông Á. 2026:89-95. doi:10.65153/h528xt37
BibTeX
@article{Bi2026,
author = {Bùi, Vũ Hùng and Bùi, Văn Hưng and Đỗ, Trung Hiếu and Đỗ, Đức Long and Dương, Công Trung},
title = {Nghiên cứu tính toán, thiết kế và chế tạo máy cắt tia nước công suất nhỏ cho vật liệu mềm},
journal = {Tạp chí Khoa học và Công nghệ Trường Đại học Công nghệ Đông Á},
year = {2026},
pages = {89--95},
doi = {10.65153/h528xt37}
}
EUVIMED