EUVIMEDEUVIMED entdecken
Crossref

Effect of vibration amplitude on mechanical response in machining of NiCrFe alloy

Dinh_Quan Doan, Huu-Chuyen Vu

Tạp chí Khoa học và Công nghệ Trường Đại học Công nghệ Đông Á · 14.10.2026 · 57-67

DOI: 10.65153/7ftz8a13 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tạp chí Khoa học và Công nghệ Trường Đại học Công nghệ Đông Á, online erschienen am 14.10.2026. Verfasst von Dinh_Quan Doan und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the cutting behavior of NiCrFe alloys under conventional and vibration-assisted cutting processes through molecular dynamics simulations. The study focuses on investigating the changes caused by tool vibrations on the mechanical response, deformation characteristics, and structural evolution during cutting at the nanoscale. The presence of vibration alters the interaction between the tool and the workpiece, creating periodic changes in contact and affecting the direction of mechanical load application. Simulations show that vibration not only reduces the cutting force but also influences the distribution and accumulation of shear strain around the cutting zone. Different vibration amplitudes are tested to clarify their role in mechanical deformation and material removal. The results show that increasing amplitude leads to a decrease in cutting force, a decrease in the friction coefficient, and an increase in the amount of material removed. These findings provide detailed atomic-level insights into enhanced material removal and morphological changes of machined surfaces under the influence of vibration.

Zitieren

APA

Doan, D., & Vu, H. (2026). Effect of vibration amplitude on mechanical response in machining of NiCrFe alloy. Tạp chí Khoa học và Công nghệ Trường Đại học Công nghệ Đông Á, 57-67. https://doi.org/10.65153/7ftz8a13

Vancouver

Doan D, Vu H. Effect of vibration amplitude on mechanical response in machining of NiCrFe alloy. Tạp chí Khoa học và Công nghệ Trường Đại học Công nghệ Đông Á. 2026:57-67. doi:10.65153/7ftz8a13

BibTeX
@article{Doan2026,
  author = {Doan, Dinh_Quan and Vu, Huu-Chuyen},
  title = {Effect of vibration amplitude on mechanical response in machining of NiCrFe alloy},
  journal = {Tạp chí Khoa học và Công nghệ Trường Đại học Công nghệ Đông Á},
  year = {2026},
  pages = {57--67},
  doi = {10.65153/7ftz8a13}
}
Kostenlos starten →