Rehabilitation and Improving of Punching Shear Strength of Flat Plates: A Review
Samarra Journal of Engineering Science and Research · 2025
DOI: 10.65115/90qzzx02 ↗Kurz gefasst
Fachartikel in der Zeitschrift Samarra Journal of Engineering Science and Research, 2025. Verfasst von Hanaa A. Ali und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
At times, due to change in design, replace in the construction design, function and general mistakes, it led to heavier or additional loads. These reason caused a brittle failure known as a punching shear of flat plates may be occur under static or dynamics load. Many works have been carried the objectives of punching shear strength presence flat slabs and the behavior of repaired flat plates damaged due to punching shear. In addition to increase thickness of slab, increase dimension of column, there are many technics focuses on slab column connection strengthened with varies way such as carbon fiber reinforced polymer, steel stiffeners, steel angle and steel collar with a view to enhancement, the punching shear strength of flat slab appears. This paper shows comparison between the slabs strengthening with these ways.
Zitieren
APA
Ali, H. A., & Al-Sherrawi, M. H. (2025). Rehabilitation and Improving of Punching Shear Strength of Flat Plates: A Review. Samarra Journal of Engineering Science and Research. https://doi.org/10.65115/90qzzx02
Vancouver
Ali HA, Al-Sherrawi MH. Rehabilitation and Improving of Punching Shear Strength of Flat Plates: A Review. Samarra Journal of Engineering Science and Research. 2025. doi:10.65115/90qzzx02
BibTeX
@article{Ali2025,
author = {Ali, Hanaa A. and Al-Sherrawi, Mohannad H.},
title = {Rehabilitation and Improving of Punching Shear Strength of Flat Plates: A Review},
journal = {Samarra Journal of Engineering Science and Research},
year = {2025},
doi = {10.65115/90qzzx02}
}
EUVIMED