EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

The innovative simple water filter for producing utility water using activated carbon from rubber tree branches

Tappagorn Leelatam, Wuttichai Roschat, Thanaphon Fongwichai, Warisara Tamprasee, Sunti Phewphong, Aekkaphon Thammayod, Prawit Suwannarong, Songphon Prayochmee, Nathaporn Jirawattanasomkul, Prawit Nuengmatcha, Vinich Promarak, Suresh Sagadevan

Engineering and Applied Science Research · 13.08.2026 · 53 (4) · 401-411

DOI: 10.64960/easr.2026.263211 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering and Applied Science Research, online erschienen am 13.08.2026. Verfasst von Tappagorn Leelatam und 11 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the development of a cost effective and an innovative household water filtration system utilizing activated carbon derived from locally sourced rubber tree branches. Aimed at improving tap water quality in the Ban Kut Saeng Community, Sakon Nakhon Province, Thailand, the research promotes sustainable material use and simple technology to enhance the availability of clean water in underdeveloped and developing regions. Activated carbon was produced through a dry activation process using NaOH, yielding high adsorption capacity 687.24 mg I₂/g for iodine and complete (100%) methylene blue removal at 100 ppm. BET surface area analysis indicated a value of 833.06 m²/g, with the pore structure exhibiting both microporous and mesoporous characteristics. The filtration performance was evaluated by comparing raw and treated water quality based on the standards of the American Public Health Association (APHA), American Water Works Association (AWWA), and Water Environment Federation (WEF), covering physical, chemical, heavy metal, and microbiological parameters. The raw water has shown high turbidity and bacterial contamination. Following two-stage filtration, Sample D exhibited the tap water quality standards, with turbidity of 9 NTU, apparent color of 2.1 Pt-Co, total dissolved solids (TDS) of 151 ppm, pH of 6.8, total hardness of 30 ppm as CaCO₃, and chloride ion concentration of 9.8 ppm. Total coliforms and E. coli counts were observed below the detectable limits (

Zitieren

APA

Leelatam, T., Roschat, W., Fongwichai, T., Tamprasee, W., Phewphong, S., Thammayod, A., Suwannarong, P., Prayochmee, S., Jirawattanasomkul, N., Nuengmatcha, P., Promarak, V., & Sagadevan, S. (2026). The innovative simple water filter for producing utility water using activated carbon from rubber tree branches. Engineering and Applied Science Research, 53(4), 401-411. https://doi.org/10.64960/easr.2026.263211

Vancouver

Leelatam T, Roschat W, Fongwichai T, Tamprasee W, Phewphong S, Thammayod A, et al. The innovative simple water filter for producing utility water using activated carbon from rubber tree branches. Engineering and Applied Science Research. 2026;53(4):401-411. doi:10.64960/easr.2026.263211

BibTeX
@article{Leelatam2026,
  author = {Leelatam, Tappagorn and Roschat, Wuttichai and Fongwichai, Thanaphon and Tamprasee, Warisara and Phewphong, Sunti and Thammayod, Aekkaphon and Suwannarong, Prawit and Prayochmee, Songphon and Jirawattanasomkul, Nathaporn and Nuengmatcha, Prawit and Promarak, Vinich and Sagadevan, Suresh},
  title = {The innovative simple water filter for producing utility water using activated carbon from rubber tree branches},
  journal = {Engineering and Applied Science Research},
  year = {2026},
  volume = {53},
  number = {4},
  pages = {401--411},
  doi = {10.64960/easr.2026.263211}
}
Kostenlos starten →