EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Powder Particle Size and Charging Efficiency on Film Build and Surface Finish

Mr. Swapnil Sanju Bhalerao, Mr. Navnath Chandrakant Palve

International Journal of Technology and Emerging Research · 2025

DOI: 10.64823/ijter.2501006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Technology and Emerging Research, 2025. Verfasst von Mr. Swapnil Sanju Bhalerao und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Powder coating, a solvent-free technique, is influenced heavily by powder particle size and electrostatic charging efficiency. This study investigates how these two factors affect film build and surface finish using epoxy-polyester hybrid powders categorized into fine (40 µm) sizes. Coatings were applied to steel panels using a corona-type spray gun under consistent voltage and flow conditions. Post-application, panels were cured and evaluated for film thickness and surface roughness. Fine powders yielded the smoothest surface (Ra = 0.8 µm) but had the lowest film build (35 µm) due to reduced charging efficiency (55%). Coarse powders achieved higher film build (65 µm) but resulted in rougher finishes (Ra = 2.0 µm). Medium particles offered a balanced performance with adequate surface finish (Ra = 1.2 µm) and film build (50 µm). Charging efficiency increased with particle size, highlighting the trade-off between deposition and surface quality. This study suggests that optimizing powder distribution and charging parameters can significantly enhance coating outcomes. Keywords: Powder coating; Particle size; Electrostatic charging; Film build; Surface roughness; Epoxy-polyester

Zitieren

APA

Bhalerao, M. S. S., & Palve, M. N. C. (2025). Effect of Powder Particle Size and Charging Efficiency on Film Build and Surface Finish. International Journal of Technology and Emerging Research. https://doi.org/10.64823/ijter.2501006

Vancouver

Bhalerao MSS, Palve MNC. Effect of Powder Particle Size and Charging Efficiency on Film Build and Surface Finish. International Journal of Technology and Emerging Research. 2025. doi:10.64823/ijter.2501006

BibTeX
@article{Bhalerao2025,
  author = {Bhalerao, Mr. Swapnil Sanju and Palve, Mr. Navnath Chandrakant},
  title = {Effect of Powder Particle Size and Charging Efficiency on Film Build and Surface Finish},
  journal = {International Journal of Technology and Emerging Research},
  year = {2025},
  doi = {10.64823/ijter.2501006}
}
Kostenlos starten →