Pre-market regulatory compliance assessment of E-cigarette liquids in Saudi Arabia: A descriptive study
Saudi Journal of Public Health · 15.07.2026 · 1 (3)
DOI: 10.64819/art000011 ↗Kurz gefasst
Fachartikel in der Zeitschrift Saudi Journal of Public Health, online erschienen am 15.07.2026. Verfasst von Salwa Almomen und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Background
Electronic cigarette (e-cigarette) use among youth is increasing, with prevalence reaching 17% globally and up to 27% in the Middle East. E-liquids may contain toxicants and carcinogens, including nicotine, heavy metals, solvents, and flavoring agents. Characterization of e-liquid composition remains limited, and regulatory standards continue to evolve. Saudi Food and Drug Authority (SFDA) has issued mandatory compositional specifications for laboratory testing before market approval. This study describes pre-market e-liquid compositional analyses and identifies violations of SFDA specifications.
Methods
A retrospective secondary analysis was conducted using a database of pre-market quality assessment tests for e-liquid products submitted for approval in Saudi Arabia between 2021 and 2023. Compliance was evaluated against the SFDA upper limits (ULs) and limits of quantification (LOQs) for nicotine, heavy metals, toxic solvents, and microbiological contaminants.
Results
A total of 2548 e-liquid samples were tested, of which the majority [2264 (89%)] showed content concentrations below the specified upper limits (ULs) or limits of quantification (LOQs) for microorganisms, heavy metals, and toxic solvents. There are no specifications for humectants concentrations, however, mean concentrations of glycerine and propylene glycol were 44.5 g/100g and 41.8 g/100g, respectively. The mean nicotine concentration was 16.7 mg/mL, below the UL of 20 mg/mL. Samples that failed approval during the years 2021-2023 (284; 11%) all exceeded the nicotine UL; additionally, three samples exceeded UL for heavy metals (As 0.61 PPM in 2021, Hg 0.28 PPM and Pb 0.81 PPM in 2022), and one sample exceeded UL for toxic solvent (Ethylene glycol 0.56 g/100g in 2022).
Conclusion
Most e-liquid products complied with SFDA pre-market compositional specifications, with non-compliance primarily driven by nicotine concentrations exceeding the regulatory limit. Heavy metals and toxic solvents rarely exceeded acceptable limits. These findings support the value of the SFDA pre-market quality assessment framework in identifying potentially non-compliant products before market entry and highlight the importance of continued surveillance and periodic review of regulatory requirements to protect public health and consumer safety.
Zitieren
APA
Almomen, S., Almutairi, M., Alyousef, S., Hafiz, R., & Taha, T. (2026). Pre-market regulatory compliance assessment of E-cigarette liquids in Saudi Arabia: A descriptive study. Saudi Journal of Public Health, 1(3). https://doi.org/10.64819/art000011
Vancouver
Almomen S, Almutairi M, Alyousef S, Hafiz R, Taha T. Pre-market regulatory compliance assessment of E-cigarette liquids in Saudi Arabia: A descriptive study. Saudi Journal of Public Health. 2026;1(3). doi:10.64819/art000011
BibTeX
@article{Almomen2026,
author = {Almomen, Salwa and Almutairi, Malak and Alyousef, Sarah and Hafiz, Radwan and Taha, Tariq},
title = {Pre-market regulatory compliance assessment of E-cigarette liquids in Saudi Arabia: A descriptive study},
journal = {Saudi Journal of Public Health},
year = {2026},
volume = {1},
number = {3},
doi = {10.64819/art000011}
}
EUVIMED