Work input and launch height of an elastomeric popper: a quantitative study
Journal of Science & Engineering · 17.05.2026 · 2 (5) · 110-113
DOI: 10.64804/9p4r7z72 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Science & Engineering, online erschienen am 17.05.2026. Verfasst von Rohan Dela Rosa und 2 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
This study quantifies the relationship between mechanical work applied during compression of an elastomeric popper and the maximum height achieved at launch. Five compression depths (1.0 cm to 4.5 cm) were each replicated three times, yielding 15 trials total. Work input was determined via trapezoidal Riemann sums of force-displacement data collected with a calibrated scissor jack and digital force gauge. Initial launch velocity was extracted frame-by-frame using Tracker video analysis software (60 frame/s), and maximum height was measured optically against a calibrated scale. Results show strong positive linear correlations between work input and both launch kinetic energy (R2 = 0.998) and peak gravitational potential energy (R2 = 0.997). Across all compression levels, an average of 54 ± 1 % of the compression work was lost prior to launch, consistent with published hysteresis losses for natural rubber under rapid inversion. The remaining 1 % conversion loss from kinetic to gravitational potential energy is attributed to aerodynamic drag and is consistent with a simple drag estimate. These results confirm the hypothesized positive correlation between work input and launch height and are quantitatively consistent with conservation of energy when dissipative mechanisms are properly accounted for.
Zitieren
APA
Rosa, R. D., Levine, M., & Khettry, D. (2026). Work input and launch height of an elastomeric popper: a quantitative study. Journal of Science & Engineering, 2(5), 110-113. https://doi.org/10.64804/9p4r7z72
Vancouver
Rosa RD, Levine M, Khettry D. Work input and launch height of an elastomeric popper: a quantitative study. Journal of Science & Engineering. 2026;2(5):110-113. doi:10.64804/9p4r7z72
BibTeX
@article{Rosa2026,
author = {Rosa, Rohan Dela and Levine, Mason and Khettry, Deven},
title = {Work input and launch height of an elastomeric popper: a quantitative study},
journal = {Journal of Science & Engineering},
year = {2026},
volume = {2},
number = {5},
pages = {110--113},
doi = {10.64804/9p4r7z72}
}
EUVIMED