EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

AN AIRCRAFT PROPELLER BLADE MODELED AND ANALYZED USING CATIA V5 WITH ANSYS CFX FOR COMPUTATIONAL FLOW

T. THOMAS ALWA EDISON, Dr. B. SANDHYA RANI

International Journal of AI Electrical Civil and Mechanical engineering · 31.07.2026 · 2 (3) · 230-235

DOI: 10.64751/jey6pq70 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of AI Electrical Civil and Mechanical engineering, online erschienen am 31.07.2026. Verfasst von T. THOMAS ALWA EDISON und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aircraft propellers are among the most demanding rotating aero-structural components because to the simultaneous application of centrifugal loads, aerodynamic bending and torsional stresses, and vibratory stimulation. Compared to their fiber-reinforced composite counterparts, traditional aluminum blades are both heavier and more prone to fatigue, despite their ease of production. An airplane propeller with several blades, designed for fabrication in a fiber-reinforced polymer composite, is detailed in this work along with its computational flow analysis and threedimensional solid modeling. A twisted aerofoil blade profile, a central hub, and the whole eight-blade rotor assembly were created by modeling the geometry in CATIA V5 utilizing the Part Design, Wireframe and Surface Design, and Assembly Design workbenches. Importing the CATIA assembly into ANSYS Workbench allowed us to examine the flow field around the spinning propeller on an unstructured tetrahedral mesh with 7,960 nodes and 41,116 elements using the Fluid Flow (CFX) system. Within 47 iterations of the outer loop, a steady-state laminar-flow solution with a uniform input velocity of 64 m/s converged to an RMS residual goal of 1×10⁻⁴, with normalized imbalances for the mass and momentum equations within ±0.04%. The rotor's thrust-generation mechanism was confirmed by post-processing, which showed pressure differentials throughout the blade surfaces ranging from around -3.27 MPa to +6.95 MPa and local flow velocities approaching 115 m/s at the tips of the blades. Along with the geometric design, the report includes the pressure, viscous forces, and moments that were retrieved from the solver and applied to the blade and hub surfaces. This provides a verified baseline flow field that may be used for future mapping onto a structural/composite laminate model of the blade. In order to advance a design to the detailed engineering stage, it must undergo specific refinements, such as turbulence modeling, rotating-reference-frame analysis, and one-way fluidstructure interaction (FSI) onto a composite lay-up. This study proves that an integrated CATIA-to-ANSYS workflow is appropriate for the preliminary aero-structural design evaluation of composite aircraft propeller blades.

Zitieren

APA

EDISON, T. T. A., & RANI, D. B. S. (2026). AN AIRCRAFT PROPELLER BLADE MODELED AND ANALYZED USING CATIA V5 WITH ANSYS CFX FOR COMPUTATIONAL FLOW. International Journal of AI Electrical Civil and Mechanical engineering, 2(3), 230-235. https://doi.org/10.64751/jey6pq70

Vancouver

EDISON TTA, RANI DBS. AN AIRCRAFT PROPELLER BLADE MODELED AND ANALYZED USING CATIA V5 WITH ANSYS CFX FOR COMPUTATIONAL FLOW. International Journal of AI Electrical Civil and Mechanical engineering. 2026;2(3):230-235. doi:10.64751/jey6pq70

BibTeX
@article{EDISON2026,
  author = {EDISON, T. THOMAS ALWA and RANI, Dr. B. SANDHYA},
  title = {AN AIRCRAFT PROPELLER BLADE MODELED AND ANALYZED USING CATIA V5 WITH ANSYS CFX FOR COMPUTATIONAL FLOW},
  journal = {International Journal of AI Electrical Civil and Mechanical engineering},
  year = {2026},
  volume = {2},
  number = {3},
  pages = {230--235},
  doi = {10.64751/jey6pq70}
}
Kostenlos starten →