Application of Response Surface Method (RSM) to optimise the performance of photodegradation to remove tetracyline
Journal of Science and Development Economics · 21.05.2026 · (40) · 183-194
DOI: 10.64632/jsde.40.2026.959 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Science and Development Economics, online erschienen am 21.05.2026. Verfasst von Nguyen Van Huy. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Tetracycline (TC) is one of the most commonly used antibiotics in medical and agricultural settings, and its persistence in aquatic environments poses significant ecological and public-health concern. Conventional wastewater-treatment processes are often ineffective in removing TC due to its non-volatile and poorly biodegradable nature. In this study, the photocatalytic degradation of TC under UVC irradiation was investigated using TiO₂ (P25), revealing a maximum degradation efficiency of 98.6%. To further enhance removal performance and systematically evaluate the influence of operational factors, Response Surface Methodology (RSM) combined with Central Composite Design (CCD) was employed. Three key parameters pH, catalyst dosage, and reaction time were selected for optimisation, and a quadratic polynomial model was developed to describe their effects on TC degradation. Analysis of variance confirmed the model’s high significance (R² = 0.969), with reaction time identified as the most influential factor. The optimised conditions predicted by the model were a TiO₂ dosage of 525.466 mg/L, solution pH of 7.47, and irradiation time of 178.416 minutes, under which an optimal removal efficiency of 98.5969% was achieved. Experimental validation under optimal conditions confirmed the model predictions. These results demonstrate that TiO₂-based photocatalysis, coupled with RSM optimisation, offers an effective strategy for antibiotic removal from contaminated water sources.
Zitieren
APA
Huy, N. V. (2026). Application of Response Surface Method (RSM) to optimise the performance of photodegradation to remove tetracyline. Journal of Science and Development Economics, 183-194. https://doi.org/10.64632/jsde.40.2026.959
Vancouver
Huy NV. Application of Response Surface Method (RSM) to optimise the performance of photodegradation to remove tetracyline. Journal of Science and Development Economics. 2026:183-194. doi:10.64632/jsde.40.2026.959
BibTeX
@article{Huy2026,
author = {Huy, Nguyen Van},
title = {Application of Response Surface Method (RSM) to optimise the performance of photodegradation to remove tetracyline},
journal = {Journal of Science and Development Economics},
year = {2026},
number = {40},
pages = {183--194},
doi = {10.64632/jsde.40.2026.959}
}
EUVIMED