EUVIMEDEUVIMED entdecken
Crossref

Power-to-Fuel Pathway: Sustainable E-Fuel Production Using Green Hydrogen and CO2 Capture

Bilel Hadrich

The University of Ha’il Journal of Science (UOHJS) · 2026

DOI: 10.64518/uohjs.2026.05 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The University of Ha’il Journal of Science (UOHJS), 2026. Verfasst von Bilel Hadrich. Die Arbeit nennt 39 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the design of an electro-fuel (e-fuel) production process (EFPP) using hydrogen from water and carbon dioxide from atmospheric air. The project aims to produce sufficient e-fuel to supply the annual fuel demand of a community of 10,000 people in Saudi Arabia. EFPP uses a Reverse Water–Gas Shift (RWGS) reactor, a Fischer–Tropsch (FT) reactor, a three-phase separator, heat exchangers, and other supporting equipment to prepare the feedstock and purify the final products. The material and energy balances were developed to simulate process performance using AspenOne Engineering® V14 (2022) software. EFPP requires 12,230 kg·h-1 of water to produce green hydrogen by electrolysis, which accounts for about 80% of the total energy demand (67.84 MW). Solar power can supply the required energy for this system. Moreover, EFPP processes 15,620 × 103 kg·h-1 of air to extract CO2. The hydrogen reacts with captured CO2 in the RWGS reactor to produce carbon monoxide (CO) and water. The CO is then fed to the FT reactor, where it reacts with additional hydrogen to synthesize liquid e-fuels (C5–C11). Technical feasibility was assessed by designing and sizing the main process units, including the RWGS reactor, the FT reactor, the three-phase separator, and the key heat exchanger. EFPP produces liquid e-fuels mainly composed of n-octane (99.9%) at about 1,674 kg·h-1, with an estimated production cost of around 1.55–1.76 USD per liter. The results show that renewable-based e-fuel production is technically feasible and economically promising.

Zitieren

APA

Hadrich, B. (2026). Power-to-Fuel Pathway: Sustainable E-Fuel Production Using Green Hydrogen and CO2 Capture. The University of Ha’il Journal of Science (UOHJS). https://doi.org/10.64518/uohjs.2026.05

Vancouver

Hadrich B. Power-to-Fuel Pathway: Sustainable E-Fuel Production Using Green Hydrogen and CO2 Capture. The University of Ha’il Journal of Science (UOHJS). 2026. doi:10.64518/uohjs.2026.05

BibTeX
@article{Hadrich2026,
  author = {Hadrich, Bilel},
  title = {Power-to-Fuel Pathway: Sustainable E-Fuel Production Using Green Hydrogen and CO2 Capture},
  journal = {The University of Ha’il Journal of Science (UOHJS)},
  year = {2026},
  doi = {10.64518/uohjs.2026.05}
}
Kostenlos starten →