EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Octane Number and Aniline Point of Petroleum FractionsRaheel Jomaa Raheel1 , Assanusi Abufares2 & Heba A. Moftah Al-Jroushe3

Raheel Jomaa Raheel, Assanusi Abufares, Heba A. Moftah Al-Jroushe Al-Jroushe

Tobruk University Journal of Engineering Sciences · 30.12.2020 · 1 (2) · 39-49

DOI: 10.64516/tujes.v1i2.65 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tobruk University Journal of Engineering Sciences, online erschienen am 30.12.2020. Verfasst von Raheel Jomaa Raheel und 2 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The quality of various petroleum fuels depends on their composition and types of hydrocarbons present in the mixture. Octane number is one of the characteristics of spark-ignition engine fuels such as gasoline and jet fuel. This number indicates anti-knock characteristic of a fuel and strongly depends on the hydrocarbon type. Two commonly used octane numbers are research octane number (RON) and motor octane number (MON). RON is measured under low speed condition by ASTM D908 while the MON is measured under high speed condition by ASTM D 357 test method. There are very few predictive methods for calculating octane number. Nelson methods are in the form of graphical correlations either in terms of boiling point and Watson characterization factor for naphtha fractions or in terms of boiling point and paraffin weight percent. Aniline point (AP) is another characteristic of petroleum fractions that indicates the degree of aromaticity of hydrocarbon mixtures. Aniline point is defined as the lowest temperature at which equal volumes of aniline and the sample become completely soluble. As amount of aromatics in a petroleum fraction increase the aniline point decreases. Therefore, the aniline point is a parameter that is highly related to the hydrocarbon types in petroleum fractions. Aniline point is a useful parameter in calculation of heat of combustion, diesel index and hydrogen content of petroleum fuels. Linden used the method of characterization of Watson and Nelson to develop a simple correlation for prediction of aniline point in terms of boiling point and API gravity. This study is aiming to use some data for prediction of RON, MON and AP by using mathematical correlations for various fuels with minimum information available.

Zitieren

APA

Raheel, R. J., Abufares, A., & Al-Jroushe, H. A. M. A. (2020). Prediction of Octane Number and Aniline Point of Petroleum FractionsRaheel Jomaa Raheel1 , Assanusi Abufares2 & Heba A. Moftah Al-Jroushe3. Tobruk University Journal of Engineering Sciences, 1(2), 39-49. https://doi.org/10.64516/tujes.v1i2.65

Vancouver

Raheel RJ, Abufares A, Al-Jroushe HAMA. Prediction of Octane Number and Aniline Point of Petroleum FractionsRaheel Jomaa Raheel1 , Assanusi Abufares2 & Heba A. Moftah Al-Jroushe3. Tobruk University Journal of Engineering Sciences. 2020;1(2):39-49. doi:10.64516/tujes.v1i2.65

BibTeX
@article{Raheel2020,
  author = {Raheel, Raheel Jomaa and Abufares, Assanusi and Al-Jroushe, Heba A. Moftah Al-Jroushe},
  title = {Prediction of Octane Number and Aniline Point of Petroleum FractionsRaheel Jomaa Raheel1 , Assanusi Abufares2 & Heba A. Moftah Al-Jroushe3},
  journal = {Tobruk University Journal of Engineering Sciences},
  year = {2020},
  volume = {1},
  number = {2},
  pages = {39--49},
  doi = {10.64516/tujes.v1i2.65}
}
Kostenlos starten →