EUVIMEDEUVIMED entdecken
Crossref

Study on wear-resistant heat treatment process of pole tips for outdoor mountaineering poles

Li Zhan, Yanli Jiang

Metalurgija · 20.07.2026 · 66 (2) · 195-208

DOI: 10.64486/m.66.2.2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metalurgija, online erschienen am 20.07.2026. Verfasst von Li Zhan und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Outdoor mountaineering pole tips are small but safety-critical components because they directly contact ice, snow, wet rock and other complex terrains. Their service stability depends on both the load-bearing capacity of the steel substrate and the antifriction/wear resistance of the copper alloy working layer. In this study, 42CrMo/ZCuPb10Sn10 Fe/Cu bimetallic pole tips were prepared by solid-liquid compound casting followed by an integrated casting-heat treatment route. The work focuses on how quenching temperature and holding time affect interfacial bonding, microstructure evolution, Pb-particle distribution, hardness and dry-sliding wear behavior. The results indicate that heat treatment improves the interfacial shear strength and microhardness compared with the as-cast state. When the quenching temperature is 850 °C and the holding time is further optimized to 90 min, the interdiffusion distance, interfacial shear strength and wear resistance reach the best overall combination among the investigated conditions. One-way ANOVA confirmed significant effects of the heat-treatment condition on interfacial shear strength, friction coefficient and wear rate (p < 0.01). SEM/EDS observations and quantitative indicators suggest that this improvement is associated with a finer Cu-side structure near the interface, reduced Sn segregation and a more dispersed Pb phase that may contribute to friction reduction during sliding. The conclusions are discussed as a process-microstructure-property relationship for Fe/Cu bimetallic pole tips within the range of the presented experimental evidence.

Zitieren

APA

Zhan, L., & Jiang, Y. (2026). Study on wear-resistant heat treatment process of pole tips for outdoor mountaineering poles. Metalurgija, 66(2), 195-208. https://doi.org/10.64486/m.66.2.2

Vancouver

Zhan L, Jiang Y. Study on wear-resistant heat treatment process of pole tips for outdoor mountaineering poles. Metalurgija. 2026;66(2):195-208. doi:10.64486/m.66.2.2

BibTeX
@article{Zhan2026,
  author = {Zhan, Li and Jiang, Yanli},
  title = {Study on wear-resistant heat treatment process of pole tips for outdoor mountaineering poles},
  journal = {Metalurgija},
  year = {2026},
  volume = {66},
  number = {2},
  pages = {195--208},
  doi = {10.64486/m.66.2.2}
}
Kostenlos starten →