Study on Surface Electromyography Electrode Based on MXene/PEDOT:PSS/PAAm Composite Material
Metalurgija · 31.03.2026 · 65 (4) · 401-409
DOI: 10.64486/m.65.4.9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metalurgija, online erschienen am 31.03.2026. Verfasst von Liwen Chen und 5 weiteren Autor:innen.
Abstract (Originalsprache)
Surface electromyography (sEMG) electrodes are critical components for signal acquisition; their material properties directly dictate the stability and accuracy of the recorded signals. To address the limitations of traditional electrodes, such as poor flexibility and signal interference, this study prepared a gel electrode based on MXene/PEDOT:PSS/PAAm. Key properties, including conductivity, adhesion, and stretchability, were systematically analyzed. Results indicate that an optimal PEDOT:PSS to MXene ratio of 6:4 yields a composite conductive material with a sheet resistance as low as 10.3 Ω/sq. Performance tests demonstrated that the electrode's adhesion strength to porcine skin tissue reached (49.10 ± 1.25) kPa. Furthermore, its contact impedance with human skin was significantly lower than that of standard Ag/AgCl electrodes in the (0.1–1000) Hz frequency range. In sEMG acquisition experiments, compared to Ag/AgCl electrodes, the prepared electrode exhibited a higher signal-to-noise ratio (SNR), lower root mean square error (RMSE), a smoother signal waveform, and a more stable baseline. The electrode demonstrates excellent conductivity and adhesion, providing a high-performance solution for wearable sEMG monitoring equipment.
Zitieren
APA
Chen, L., Wu, W., Cui, B., Zhang, X., Li, J., & Guo, L. (2026). Study on Surface Electromyography Electrode Based on MXene/PEDOT:PSS/PAAm Composite Material. Metalurgija, 65(4), 401-409. https://doi.org/10.64486/m.65.4.9
Vancouver
Chen L, Wu W, Cui B, Zhang X, Li J, Guo L. Study on Surface Electromyography Electrode Based on MXene/PEDOT:PSS/PAAm Composite Material. Metalurgija. 2026;65(4):401-409. doi:10.64486/m.65.4.9
BibTeX
@article{Chen2026,
author = {Chen, Liwen and Wu, Weiying and Cui, Bingyan and Zhang, Xintao and Li, Jianyi and Guo, Lei},
title = {Study on Surface Electromyography Electrode Based on MXene/PEDOT:PSS/PAAm Composite Material},
journal = {Metalurgija},
year = {2026},
volume = {65},
number = {4},
pages = {401--409},
doi = {10.64486/m.65.4.9}
}
EUVIMED