EUVIMEDEUVIMED entdecken
Crossref

Influence of Solid Solution Temperature on the Microstructure Evaluation of 15-5PH Stainless Steel for Pipe Organ Rail Rod Applications

Chang Liu, Tian Liu

Metalurgija · 2025

DOI: 10.64486/m.65.2.6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metalurgija, 2025. Verfasst von Chang Liu und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effect of solid solution treatment temperature on the microstructure and mechanical properties of 15-5PH stainless steel, with the aim of optimizing its performance for precision mechanical components. Samples were solution-treated at 975 °C, 1000 °C, 1025 °C, and 1050 °C, followed by aging at 480 °C for 1 h. Microstructural observations revealed progressive grain coarsening with increasing solution temperature. Mechanical testing showed that yield and tensile strengths increased with temperature up to 1025 °C, reaching maximum values of 1390 MPa and 1286 MPa, respectively, due to enhanced dissolution of strengthening phases prior to aging. In contrast, ductility and impact energy decreased consistently with increasing temperature; the highest toughness was obtained at 975 °C (35.5 J), while the lowest values occurred at 1050 °C (6.5 J). The optimal combination of strength and ductility was achieved at 1025 °C, indicating this temperature as the most effective solution-treatment condition for the tested steel. These findings provide a basis for selecting heat-treatment parameters to enhance the performance and reliability of components manufactured from 15-5PH stainless steel.

Zitieren

APA

Liu, C., & Liu, T. (2025). Influence of Solid Solution Temperature on the Microstructure Evaluation of 15-5PH Stainless Steel for Pipe Organ Rail Rod Applications. Metalurgija. https://doi.org/10.64486/m.65.2.6

Vancouver

Liu C, Liu T. Influence of Solid Solution Temperature on the Microstructure Evaluation of 15-5PH Stainless Steel for Pipe Organ Rail Rod Applications. Metalurgija. 2025. doi:10.64486/m.65.2.6

BibTeX
@article{Liu2025,
  author = {Liu, Chang and Liu, Tian},
  title = {Influence of Solid Solution Temperature on the Microstructure Evaluation of 15-5PH Stainless Steel for Pipe Organ Rail Rod Applications},
  journal = {Metalurgija},
  year = {2025},
  doi = {10.64486/m.65.2.6}
}
Kostenlos starten →