Numerical Analysis and Simulation Approach of Copper Antimony Sulfide Based Thin Film Solar Cell with Dual Heterojunction
Electrical Engineering and Energy (ELENE) · 01.01.2026
DOI: 10.64470/elene.2026.32 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electrical Engineering and Energy (ELENE), online erschienen am 01.01.2026. Verfasst von Hafizur Rahman Alve und 2 weiteren Autor:innen.
Abstract (Originalsprache)
This paper presents a SCAPS-1D numerical investigation of a Copper Antimony Sulfide (CuSbS2)-based thin-film solar cell using a dual-heterojunction n-ZnSe/p-CuSbS2/p+-BMO structure. The influence of ZnSe window-layer thickness and ferroelectric BSF materials including BFO, BTO and BMO was evaluated under AM1.5G illumination using literature-based material parameters. Under the adopted idealized simulation conditions, the optimized BMO-based structure produced Voc = 1.257 V, Jsc = 46.819 mA/cm2, FF = 83.21% and PCE = 48.96%. Because this result is unusually high for a CuSbS2-based thin-film device, it is interpreted as a numerical upper-limit case that requires further validation using complete optical, recombination and experimental device analysis.
Zitieren
APA
Alve, H. R., Azmol, S., & Dey, M. (2026). Numerical Analysis and Simulation Approach of Copper Antimony Sulfide Based Thin Film Solar Cell with Dual Heterojunction. Electrical Engineering and Energy (ELENE). https://doi.org/10.64470/elene.2026.32
Vancouver
Alve HR, Azmol S, Dey M. Numerical Analysis and Simulation Approach of Copper Antimony Sulfide Based Thin Film Solar Cell with Dual Heterojunction. Electrical Engineering and Energy (ELENE). 2026. doi:10.64470/elene.2026.32
BibTeX
@article{Alve2026,
author = {Alve, Hafizur Rahman and Azmol, Samia and Dey, Mrinmoy},
title = {Numerical Analysis and Simulation Approach of Copper Antimony Sulfide Based Thin Film Solar Cell with Dual Heterojunction},
journal = {Electrical Engineering and Energy (ELENE)},
year = {2026},
doi = {10.64470/elene.2026.32}
}
EUVIMED