EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Photoelectrocatalysis Behavior of Iron Oxide and Cobalt-doped Iron Oxide (Oxyhydroxide) Thin Films for Water Splitting.

Nabeel O. Hasan, Zahra A. Fattah, Mark D. Symes

Zanin Journal of Science and Engineering · 30.06.2026 · 2 (2) · 107-119

DOI: 10.64362/zjse.247 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Zanin Journal of Science and Engineering, online erschienen am 30.06.2026. Verfasst von Nabeel O. Hasan und 2 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solar-driven photoelectrochemical water splitting has great potential for hydrogen production as a sustainable, clean energy vector. Iron oxide (α-Fe2O3, hematite) represents one of the most promising earth-abundant photoanode materials. Here, electrochemical deposition of hematite films on fluorine-doped tin oxide substrates was performed using a two-electrode setup. An overlayer of cobalt-doped iron oxide (oxyhydroxide) (Co–FeOx(FeOOH)) was subsequently electrodeposited onto the as-prepared hematite under different growth conditions to improve its photoelectrochemical performance. The synthesized films were characterized by SEM, EDX, XRD, and XPS, and their properties were investigated in phosphate buffer (pH 7). The Co-doped hematite/goethite heterostructure improved the photocatalytic activity of the modified film (a 170-mV cathodic shift in the onset potential and an ~18% increase in the amount of dissolved oxygen produced) compared to pristine hematite. A current density of 4.7 mA cm-2 was obtained with the Co-doped electrode at a potential of 2.2 V vs reversible hydrogen electrode (RHE). Under 0.1 sun illumination, the modified film achieved a net photocurrent of ~0.7 ± 0.01 mA cm-2, compared to 0.4 ± 0.01 mA cm-2 for pure hematite. This enhancement in photocatalytic performance is attributed to the rougher surface (higher light absorption) and the lower band gap of the Co–FeOx(FeOOH) overlayer. The stability of the modified electrode was investigated over 90 min; it showed a stable current density of ~2.1 mA cm-2 at a potential of 2.1 V vs RHE in the dark. These results demonstrate that the films exhibit suitable photoanode properties for water splitting.

Zitieren

APA

Hasan, N. O., Fattah, Z. A., & Symes, M. D. (2026). Photoelectrocatalysis Behavior of Iron Oxide and Cobalt-doped Iron Oxide (Oxyhydroxide) Thin Films for Water Splitting. Zanin Journal of Science and Engineering, 2(2), 107-119. https://doi.org/10.64362/zjse.247

Vancouver

Hasan NO, Fattah ZA, Symes MD. Photoelectrocatalysis Behavior of Iron Oxide and Cobalt-doped Iron Oxide (Oxyhydroxide) Thin Films for Water Splitting. Zanin Journal of Science and Engineering. 2026;2(2):107-119. doi:10.64362/zjse.247

BibTeX
@article{Hasan2026,
  author = {Hasan, Nabeel O. and Fattah, Zahra A. and Symes, Mark D.},
  title = {Photoelectrocatalysis Behavior of Iron Oxide and Cobalt-doped Iron Oxide (Oxyhydroxide) Thin Films for Water Splitting},
  journal = {Zanin Journal of Science and Engineering},
  year = {2026},
  volume = {2},
  number = {2},
  pages = {107--119},
  doi = {10.64362/zjse.247}
}
Kostenlos starten →