Performance Characterization of Cold Asphalt Mixtures Incorporating Carbon-Sulfur Waste as a Sustainable Mineral Filler Replacement.
Zanin Journal of Science and Engineering · 30.03.2026 · 2 (1)
DOI: 10.64362/zjse.204 ↗Kurz gefasst
Fachartikel in der Zeitschrift Zanin Journal of Science and Engineering, online erschienen am 30.03.2026. Verfasst von Abdul-Rahim AlHadidy und 1 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
This study investigates the feasibility of incorporating carbon-sulfur waste (blowdown) in cold asphalt emulsion mixtures as a sustainable alternative to conventional materials. The research addresses the growing need for environmentally friendly pavement solutions by evaluating the mechanical properties and durability performance of mixtures with varying proportions of Ordinary Portland Cement (OPC) and blowdown waste. A comprehensive experimental program was conducted following standard procedures, including Marshall stability tests, Kim deformation tests, and indirect tensile strength measurements under different moisture and temperature conditions. Results demonstrated a significant positive correlation between OPC content and mixture performance, with the 72CB mixture (100% OPC as a filler) showing a twelve-fold improvement in Marshall stability and approximately 13.7 times greater deformation strength compared to the 0CB mixture (100% blowdown). Notably, the 36CB mixture (50% OPC:50% blowdown) achieved a tensile strength ratio of 78.5%, exceeding the ASTM minimum threshold of 75% for acceptable moisture resistance. The study revealed that mixtures containing 36% or higher OPC content met Korean acceptance criteria for surface mixtures (Kim test) and demonstrated improved temperature stability, with only a 12.3% reduction in strength when transitioning from 25°C to 60°C compared to 34.7% for pure blowdown mixtures. These findings indicate that moderate incorporation of blowdown waste (up to 50%) in cold asphalt emulsion mixtures is viable while maintaining adequate performance characteristics. The research contributes to sustainable pavement technology by providing a practical solution for carbon-sulfur waste utilization without compromising structural integrity, offering environmental and economic benefits for road construction industries.
Zitieren
APA
AlHadidy, A., & Yaseen, B. A. (2026). Performance Characterization of Cold Asphalt Mixtures Incorporating Carbon-Sulfur Waste as a Sustainable Mineral Filler Replacement. Zanin Journal of Science and Engineering, 2(1). https://doi.org/10.64362/zjse.204
Vancouver
AlHadidy A, Yaseen BA. Performance Characterization of Cold Asphalt Mixtures Incorporating Carbon-Sulfur Waste as a Sustainable Mineral Filler Replacement. Zanin Journal of Science and Engineering. 2026;2(1). doi:10.64362/zjse.204
BibTeX
@article{AlHadidy2026,
author = {AlHadidy, Abdul-Rahim and Yaseen, Badr A.},
title = {Performance Characterization of Cold Asphalt Mixtures Incorporating Carbon-Sulfur Waste as a Sustainable Mineral Filler Replacement},
journal = {Zanin Journal of Science and Engineering},
year = {2026},
volume = {2},
number = {1},
doi = {10.64362/zjse.204}
}
EUVIMED