Mô hình hóa và tối ưu hóa độ nhám bề mặt trong gia công tia lửa điện có hỗ trợ rung siêu âm đối với thép Hardox 500 bằng phương pháp RSM và GPR
VLUTE JOURNAL OF SCIENCE · 28.06.2026 · 2 (2)
DOI: 10.64215/t9avgn91 ↗Kurz gefasst
Fachartikel in der Zeitschrift VLUTE JOURNAL OF SCIENCE, online erschienen am 28.06.2026. Verfasst von Nguyễn Công Danh und 3 weiteren Autor:innen.
Abstract (Originalsprache)
This study investigates the surface roughness behavior in ultrasonic vibration-assisted electrical discharge machining (UV-EDM) of Hardox 500 steel, a material known for its high hardness and wear resistance. A Box–Behnken experimental design was employed with five input parameters: vibration amplitude (A), pulse-on time (Ton), pulse-off time (Toff), discharge current (IP), and servo voltage (SV). The experimental data were first modeled using a response surface methodology (RSM) quadratic regression, which provided acceptable predictive capability (R² = 0.867). To enhance prediction accuracy, Gaussian process regression (GPR) models with different kernel–basis function combinations were evaluated. Among them, the Matern 3/2 kernel with a pure quadratic basis achieved the best performance (R² = 0.994, Adjusted R² = 0.993), significantly outperforming RSM. Optimization using the best GPR model identified the optimal process conditions (A = 3.22 µm, Ton = 8 µs, Toff = 12.20 µs, IP = 7.10 A, SV = 5.02 V), yielding a predicted minimum surface roughness of 2.56 µm. The findings demonstrate that GPR provides superior modeling accuracy over RSM, offering a reliable tool for surface quality improvement in UV-EDM of difficult-to-machine steels.
Zitieren
APA
Danh, N. C., Cường, N. M., Lợi, M. T., & Danh, T. H. (2026). Mô hình hóa và tối ưu hóa độ nhám bề mặt trong gia công tia lửa điện có hỗ trợ rung siêu âm đối với thép Hardox 500 bằng phương pháp RSM và GPR. VLUTE JOURNAL OF SCIENCE, 2(2). https://doi.org/10.64215/t9avgn91
Vancouver
Danh NC, Cường NM, Lợi MT, Danh TH. Mô hình hóa và tối ưu hóa độ nhám bề mặt trong gia công tia lửa điện có hỗ trợ rung siêu âm đối với thép Hardox 500 bằng phương pháp RSM và GPR. VLUTE JOURNAL OF SCIENCE. 2026;2(2). doi:10.64215/t9avgn91
BibTeX
@article{Danh2026,
author = {Danh, Nguyễn Công and Cường, Nguyễn Mạnh and Lợi, Mai Tất and Danh, Trần Hữu},
title = {Mô hình hóa và tối ưu hóa độ nhám bề mặt trong gia công tia lửa điện có hỗ trợ rung siêu âm đối với thép Hardox 500 bằng phương pháp RSM và GPR},
journal = {VLUTE JOURNAL OF SCIENCE},
year = {2026},
volume = {2},
number = {2},
doi = {10.64215/t9avgn91}
}
EUVIMED