EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

On the Accuracy of MTS and GMTS Criteria for Mixed-Mode PMMA Fracture in ASCB Geometry: Considering Constrain Effects and T-Stress

A. S. Fayed

The Saudi Journal of Applied Sciences and Technology · 15.07.2026 · 3 (1)

DOI: 10.63908/yswbex67 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Saudi Journal of Applied Sciences and Technology, online erschienen am 15.07.2026. Verfasst von A. S. Fayed. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work investigates the effect of non-singular T-stress on mixed-mode crack initiation in asymmetrical semi-circular bend (ASCB) PMMA specimens. Finite element models were developed for various crack length ratios and support spans, ranging from nearly pure mode I to dominant mode II loading. The Mode I and II stress‑intensity factors and the normalized T‑stress were extracted for predicting the crack‑initiation angles using the classical Maximum Tangential Stress (MTS) and the Generalized MTS (GMTS) criteria. The results show that the T-stress is compressive and weakly dependent on the support positions for short cracks, and the initiation angles of the two criteria are almost the same. For deep cracks, the constraint is very sensitive to the support spans. The T-stress sign changes from negative to positive with increasing one of the supports’ span relative to the other, which results in significant differences between MTS and GMTS predictions. Sensitivity analysis shows a geometric low-sensitivity range where the mixed-mode state is robust to positioning errors, guaranteeing reproducible ASCB testing. While both criteria agree for small or positive T-stress values, MTS predicts significantly higher initiation angles than GMTS under highly negative T-stress with angular discrepancies exceeding 8o. The results indicate that T-stress is a major factor influencing the level of agreement between singular and generalized criteria. This work provides quantitative guidelines for selecting support configurations and identifying geometries where T-stress-based assessments are necessary for reliable fracture evaluation.

Zitieren

APA

Fayed, A. S. (2026). On the Accuracy of MTS and GMTS Criteria for Mixed-Mode PMMA Fracture in ASCB Geometry: Considering Constrain Effects and T-Stress. The Saudi Journal of Applied Sciences and Technology, 3(1). https://doi.org/10.63908/yswbex67

Vancouver

Fayed AS. On the Accuracy of MTS and GMTS Criteria for Mixed-Mode PMMA Fracture in ASCB Geometry: Considering Constrain Effects and T-Stress. The Saudi Journal of Applied Sciences and Technology. 2026;3(1). doi:10.63908/yswbex67

BibTeX
@article{Fayed2026,
  author = {Fayed, A. S.},
  title = {On the Accuracy of MTS and GMTS Criteria for Mixed-Mode PMMA Fracture in ASCB Geometry: Considering Constrain Effects and T-Stress},
  journal = {The Saudi Journal of Applied Sciences and Technology},
  year = {2026},
  volume = {3},
  number = {1},
  doi = {10.63908/yswbex67}
}
Kostenlos starten →