EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Design of the Transmission System for a Charcoal Briquette Molding Machine

Ahmad Sutarno, Tri Mulyanto

Journal of Multidisciplinary Research and Technology · 12.08.2026 · 2 (3) · 182-190

DOI: 10.63891/j-mart.v2i3.277 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Multidisciplinary Research and Technology, online erschienen am 12.08.2026. Verfasst von Ahmad Sutarno und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biomass and organic waste can be utilized as alternative fuel through a briquetting process. A stable molding process requires a transmission system capable of transmitting power, controlling rotational speed, and providing adequate torque to the screw extruder. This study aims to design the transmission system of a charcoal briquette molding machine and evaluate the feasibility of the pulley through theoretical calculations and static simulation using SolidWorks 2025. The machine uses a 2 HP (1.5 kW) AC electric motor at 1400 rpm, a pulley–V-belt system, a WPA 60 A reduction gearbox, an AISI 1035 shaft, and an ASTM A36 Steel pulley. The design results show a system power of 149 W and a calculated motor power requirement of 169.8 W. The selected motor has a rated power of 1.5 kW and a rated torque of 10.17 Nm, while the required screw torque is 4.23 Nm. An effective 10:1 transmission ratio is used to reduce the motor speed from 1400 rpm to approximately 140 rpm at the screw. The pulley simulation produces a maximum von Mises stress of 8.048 MPa, a maximum displacement of 0.002 mm, and a minimum safety factor of approximately 6.8. These results indicate that the pulley design is safe under the simulated loading condition

Zitieren

APA

Sutarno, A., & Mulyanto, T. (2026). Design of the Transmission System for a Charcoal Briquette Molding Machine. Journal of Multidisciplinary Research and Technology, 2(3), 182-190. https://doi.org/10.63891/j-mart.v2i3.277

Vancouver

Sutarno A, Mulyanto T. Design of the Transmission System for a Charcoal Briquette Molding Machine. Journal of Multidisciplinary Research and Technology. 2026;2(3):182-190. doi:10.63891/j-mart.v2i3.277

BibTeX
@article{Sutarno2026,
  author = {Sutarno, Ahmad and Mulyanto, Tri},
  title = {Design of the Transmission System for a Charcoal Briquette Molding Machine},
  journal = {Journal of Multidisciplinary Research and Technology},
  year = {2026},
  volume = {2},
  number = {3},
  pages = {182--190},
  doi = {10.63891/j-mart.v2i3.277}
}
Kostenlos starten →