EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Structural Material Analysis of an Incinerator Wet Scrubber Using SolidWorks Static Simulation

Armanda Prakoso, Haris Rudianto

Journal of Multidisciplinary Research and Technology · 07.08.2026 · 2 (3) · 72-84

DOI: 10.63891/j-mart.v2i3.255 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Multidisciplinary Research and Technology, online erschienen am 07.08.2026. Verfasst von Armanda Prakoso und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing amount of solid waste generated from domestic, industrial, and medical activities has become a major environmental concern, requiring effective treatment technologies that are environmentally friendly and operationally safe. Incineration is one of the most widely used thermal treatment methods because it significantly reduces waste volume and destroys hazardous substances through high-temperature combustion. However, the combustion process produces flue gases containing particulate matter and acidic compounds that require an emission control system. Therefore, the integration of a wet scrubber into an incinerator system is essential to reduce air pollutant emissions before they are released into the atmosphere. Besides emission control performance, structural integrity is an important aspect because the equipment continuously supports heavy components during operation. This study aimed to evaluate the structural performance of an incinerator integrated with a wet scrubber through static structural analysis using the Finite Element Analysis (FEA) method in SolidWorks 2022. The investigation focused on three primary structural components: the primary chamber, afterburner, and water tank. Static loading conditions were applied by considering the self-weight of each component under gravitational acceleration. The structural responses were evaluated based on Von Mises stress distribution, displacement, and Factor of Safety (FoS) to determine the mechanical reliability of the proposed design. The simulation results showed that the maximum Von Mises stress obtained from the structural analysis was 1,846 MPa, while the maximum displacement reached 0,044 mm. The minimum Factor of Safety (FoS) obtained was 93.363, indicating that all structural components remained well below the material yield strength and operated within the elastic region under the applied static loading conditions.. Furthermore, the calculated Factor of Safety values were considerably higher than the minimum acceptable design criteria, indicating that the proposed structure operates entirely within the elastic region without experiencing yielding or structural failure under the applied static loading conditions. These findings demonstrate that the designed incinerator wet scrubber possesses sufficient structural strength for static operation and provides a reliable basis for future fabrication and further development involving thermal and dynamic loading analyses.

Zitieren

APA

Prakoso, A., & Rudianto, H. (2026). Structural Material Analysis of an Incinerator Wet Scrubber Using SolidWorks Static Simulation. Journal of Multidisciplinary Research and Technology, 2(3), 72-84. https://doi.org/10.63891/j-mart.v2i3.255

Vancouver

Prakoso A, Rudianto H. Structural Material Analysis of an Incinerator Wet Scrubber Using SolidWorks Static Simulation. Journal of Multidisciplinary Research and Technology. 2026;2(3):72-84. doi:10.63891/j-mart.v2i3.255

BibTeX
@article{Prakoso2026,
  author = {Prakoso, Armanda and Rudianto, Haris},
  title = {Structural Material Analysis of an Incinerator Wet Scrubber Using SolidWorks Static Simulation},
  journal = {Journal of Multidisciplinary Research and Technology},
  year = {2026},
  volume = {2},
  number = {3},
  pages = {72--84},
  doi = {10.63891/j-mart.v2i3.255}
}
Kostenlos starten →