EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Prototype Manufacturing of Unmanned Solar Cars Based on the Internet of Things

Ade Sulis Setiawan, Sri Poernomo Sari

Journal of Multidisciplinary Research and Technology · 11.08.2026 · 2 (3) · 167-181

DOI: 10.63891/j-mart.v2i3.246 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Multidisciplinary Research and Technology, online erschienen am 11.08.2026. Verfasst von Ade Sulis Setiawan und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of renewable energy technology is encouraging the use of solar power systems in small-scale electric vehicles, including prototypes of Internet of Things (IoT)-based unmanned solar cars. The main problem in remote control (RC) vehicles is the limited battery capacity which causes a relatively short operating time, so an alternative energy source that is environmentally friendly and sustainable is needed. This research aims to analyze the manufacturing process, evaluate the fabrication results of the frame and drive system, and implement an IoT-based electrical system on a prototype of an unmanned solar car. The research methods include literature study, designing using SolidWorks 2022 software, manual manufacturing processes, assembly of mechanical and electrical components, and functional testing of prototypes. The prototype frame is made using 6063-T5 aluminum material with a thickness of 2 mm, while the body uses acrylic with a thickness of 2 mm for a lightweight construction. The results of the manufacturing process show a linear speed of grinding stone of 57.6 m/s at 11.000 rpm, with a cutting time of 1.25 minutes and a cutting force of 12.15 N. In the drilling process using a 3 mm diameter drill bit, a cutting speed of 26.4 m/min, a feed rate of 140 mm/min, a drilling time of 1.3 seconds, and a drilling force of 909 N. The drive system uses a brushed DC motor with a 23-gear bevel transmission and an MG996R servo as the steering system. The electrical system consists of a 3 Wp monocrystalline solar panel, a 10 A solar charge controller, four 18650 type lithium-ion batteries, and an ESP32 microcontroller as an IoT-based control center. The test results show that the prototype is able to operate well, has a lightweight but strong structure, and the solar power system and IoT control can be effectively integrated so that it is suitable for use as a medium for learning, research, and development of small-scale unmanned electric vehicles.

Zitieren

APA

Setiawan, A. S., & Sari, S. P. (2026). Prototype Manufacturing of Unmanned Solar Cars Based on the Internet of Things. Journal of Multidisciplinary Research and Technology, 2(3), 167-181. https://doi.org/10.63891/j-mart.v2i3.246

Vancouver

Setiawan AS, Sari SP. Prototype Manufacturing of Unmanned Solar Cars Based on the Internet of Things. Journal of Multidisciplinary Research and Technology. 2026;2(3):167-181. doi:10.63891/j-mart.v2i3.246

BibTeX
@article{Setiawan2026,
  author = {Setiawan, Ade Sulis and Sari, Sri Poernomo},
  title = {Prototype Manufacturing of Unmanned Solar Cars Based on the Internet of Things},
  journal = {Journal of Multidisciplinary Research and Technology},
  year = {2026},
  volume = {2},
  number = {3},
  pages = {167--181},
  doi = {10.63891/j-mart.v2i3.246}
}
Kostenlos starten →