EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Design of an IoT-Based Electrical System for an Unmanned Solar-Powered Car Prototype

Bambang Anggoro Putro, Sri Poernomo Sari

Journal of Multidisciplinary Research and Technology · 10.08.2026 · 2 (3) · 152-166

DOI: 10.63891/j-mart.v2i3.245 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Multidisciplinary Research and Technology, online erschienen am 10.08.2026. Verfasst von Bambang Anggoro Putro und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing development of renewable energy technologies has encouraged the integration of photovoltaic (PV) systems into small-scale electric vehicle platforms. This study aims to design and evaluate an Internet of Things (IoT)-based electrical system for an unmanned solar-powered car prototype using a 3 Wp monocrystalline solar panel. The electrical system consists of a solar panel, Schottky diode, PWM Solar Charge Controller (SCC), 18650 lithium-ion battery, ESP32 microcontroller, BTS7960 and L298N motor drivers, RS550 DC motor, and MG996R servo motor. The research employed a design and experimental method involving electrical system design, ESP32 programming using Arduino IDE, hardware assembly, and experimental testing. Voltage, current, ambient temperature, power consumption, battery charging time, and system operating time were evaluated. Experimental results showed that the solar panel produced voltages of 6.8–8.9 V and currents of 0.30–0.37 A during testing from 10:00 to 16:00 WIB. The average voltage and current were 7.60 V and 0.34 A, respectively, corresponding to an average power output of 2.58 W and estimated daily energy production of 20.64 Wh. Battery charging efficiency was approximately 85%, with an equivalent charging duration of approximately 14.8 h at the measured average PV power. The total electrical load was 78.8 W, resulting in an estimated operating time of approximately 25 min when the battery was fully charged. The ESP32-based Bluetooth control system successfully controlled the DC motor and steering servo with stable response. The prototype is primarily intended as an educational and experimental platform for studying the integration of photovoltaic energy, battery storage, and IoT-based control, rather than as a fully self-sustained solar-powered vehicle.

Zitieren

APA

Putro, B. A., & Sari, S. P. (2026). Design of an IoT-Based Electrical System for an Unmanned Solar-Powered Car Prototype. Journal of Multidisciplinary Research and Technology, 2(3), 152-166. https://doi.org/10.63891/j-mart.v2i3.245

Vancouver

Putro BA, Sari SP. Design of an IoT-Based Electrical System for an Unmanned Solar-Powered Car Prototype. Journal of Multidisciplinary Research and Technology. 2026;2(3):152-166. doi:10.63891/j-mart.v2i3.245

BibTeX
@article{Putro2026,
  author = {Putro, Bambang Anggoro and Sari, Sri Poernomo},
  title = {Design of an IoT-Based Electrical System for an Unmanned Solar-Powered Car Prototype},
  journal = {Journal of Multidisciplinary Research and Technology},
  year = {2026},
  volume = {2},
  number = {3},
  pages = {152--166},
  doi = {10.63891/j-mart.v2i3.245}
}
Kostenlos starten →