EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Design and Structural Analysis of the Savonius Turbine Shaft in a Hybrid Solar-Wind Power Plant Using SolidWorks Simulation

Rido Alif Supriatno, Supriyono

Journal of Multidisciplinary Research and Technology · 04.08.2026 · 2 (3) · 16-27

DOI: 10.63891/j-mart.v2i3.233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Multidisciplinary Research and Technology, online erschienen am 04.08.2026. Verfasst von Rido Alif Supriatno und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of hybrid power plants (PLTH) based on solar and wind energy has become one of the alternatives for improving the reliability of the electricity supply from renewable energy sources. In such systems, the Savonius turbine shaft serves as the main component that transmits torque from the rotor to the generator; therefore, the structural strength of the shaft must be evaluated prior to the manufacturing process. This study aims to design and analyze the structural characteristics of the Savonius turbine shaft using SolidWorks through the Finite Element Method (FEM) approach. The shaft material used is AISI 4340 Normalized with a yield strength of 710 MPa, while the applied load consists of a torque of 500 Nm. The parameters analyzed include the distribution of von Mises stress, displacement, and the safety factor, which were then compared with the results of theoretical calculations. The results of the theoretical analysis showed a maximum stress of 154.615 MPa, a displacement of 1.03 mm, and a safety factor of 4.5. Meanwhile, the FEM simulation yielded a maximum von Mises stress of 273.106 MPa, a maximum displacement of 2.148 mm, and a minimum safety factor of 2.7. Although the simulation results showed higher stress and deformation values compared to the theoretical approach, all parameters remained below the material’s yield strength, meaning the shaft continued to operate in the elastic range without undergoing plastic deformation

Zitieren

APA

Supriatno, R. A., & Supriyono (2026). Design and Structural Analysis of the Savonius Turbine Shaft in a Hybrid Solar-Wind Power Plant Using SolidWorks Simulation. Journal of Multidisciplinary Research and Technology, 2(3), 16-27. https://doi.org/10.63891/j-mart.v2i3.233

Vancouver

Supriatno RA, Supriyono. Design and Structural Analysis of the Savonius Turbine Shaft in a Hybrid Solar-Wind Power Plant Using SolidWorks Simulation. Journal of Multidisciplinary Research and Technology. 2026;2(3):16-27. doi:10.63891/j-mart.v2i3.233

BibTeX
@article{Supriatno2026,
  author = {Supriatno, Rido Alif and Supriyono},
  title = {Design and Structural Analysis of the Savonius Turbine Shaft in a Hybrid Solar-Wind Power Plant Using SolidWorks Simulation},
  journal = {Journal of Multidisciplinary Research and Technology},
  year = {2026},
  volume = {2},
  number = {3},
  pages = {16--27},
  doi = {10.63891/j-mart.v2i3.233}
}
Kostenlos starten →