Structural Design and Strength Analysis of the Frame of an Oil Palm Fertilizer Spreader Machine
Journal of Multidisciplinary Research and Technology · 04.08.2026 · 2 (3) · 28-37
DOI: 10.63891/j-mart.v2i3.232 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Multidisciplinary Research and Technology, online erschienen am 04.08.2026. Verfasst von Valentino Sean Abyasa Genewa und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
The static load was applied based on the total mass of the drive-train components (electric motor, pulleys, V-belts, and gear box) of 24.8 kg, equivalent to a compressive force of 243.1 N. The simulation results showed a maximum Von Mises stress of 18.752 MPa, a maximum displacement of 0.216 mm, and a Factor of Safety of 10.8. Manual theoretical calculations, performed using the correct hollow square cross-section properties (A = 144 mm², I = 7,872 mm⁴), yielded a Von Mises stress of 154.38 MPa, a displacement of 6.43 mm, and a Factor of Safety of 1.32. The comparison between the simulation and theoretical results showed discrepancies of 87.9% for Von Mises stress, 96.6% for displacement, and 718% for Factor of Safety, attributed to the simplified single-beam analytical model compared to the actual multi-member frame captured by the finite element simulation. Despite these differences, both the simulation and theoretical results indicate that the frame remains below the material's yield stress limit and has a safety factor above one, confirming that the frame design is safe and suitable for use as the structure of an oil palm plantation fertilizer spreader machine.
Zitieren
APA
Genewa, V. S. A., & Supriyono (2026). Structural Design and Strength Analysis of the Frame of an Oil Palm Fertilizer Spreader Machine. Journal of Multidisciplinary Research and Technology, 2(3), 28-37. https://doi.org/10.63891/j-mart.v2i3.232
Vancouver
Genewa VSA, Supriyono. Structural Design and Strength Analysis of the Frame of an Oil Palm Fertilizer Spreader Machine. Journal of Multidisciplinary Research and Technology. 2026;2(3):28-37. doi:10.63891/j-mart.v2i3.232
BibTeX
@article{Genewa2026,
author = {Genewa, Valentino Sean Abyasa and Supriyono},
title = {Structural Design and Strength Analysis of the Frame of an Oil Palm Fertilizer Spreader Machine},
journal = {Journal of Multidisciplinary Research and Technology},
year = {2026},
volume = {2},
number = {3},
pages = {28--37},
doi = {10.63891/j-mart.v2i3.232}
}
EUVIMED