Production Process of Deep Groove Ball Bearing Type 6201 at PT XYZ
Journal of Multidisciplinary Research and Technology · 05.08.2026 · 2 (2)
DOI: 10.63891/j-mart.v2i2.208 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Multidisciplinary Research and Technology, online erschienen am 05.08.2026. Verfasst von Aqil Azmi Aditya und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Deep Groove Ball Bearings are essential components in rotating machinery because they reduce friction, support radial loads, and maintain rotational stability during continuous operation. This study aimed to describe the production process of Deep Groove Ball Bearing (DGBB) type 6201 at PT XYZ and to identify the function of each production stage in achieving the required product quality. A descriptive qualitative approach was applied using a literature review, direct field observations, and interviews with production operators and technicians. The observations identified a sequential process comprising heat treatment, raceway and bore grinding, honing, pneumatic assembly, inspection, grease filling, sealing or shielding, preservative application, and final packing. The observed heat-treatment parameters included hardening at approximately 850 °C for 4 hours, oil quenching at approximately 80 °C for 1 hour, and tempering at 150 to 240 °C for 50 to 120 minutes, with a target hardness range of 59 to 64 HRC. Grinding and honing were identified as critical finishing stages because they determine dimensional accuracy and surface quality. Product conformity was verified through free-run testing, noise and vibration testing, radial-clearance measurement, and camera-based poka-yoke inspection. These observations indicate that the quality of DGBB type 6201 depends on stable control of heat treatment, precision finishing, assembly, and inspection.
Zitieren
APA
Aditya, A. A., & Ariyanto (2026). Production Process of Deep Groove Ball Bearing Type 6201 at PT XYZ. Journal of Multidisciplinary Research and Technology, 2(2). https://doi.org/10.63891/j-mart.v2i2.208
Vancouver
Aditya AA, Ariyanto. Production Process of Deep Groove Ball Bearing Type 6201 at PT XYZ. Journal of Multidisciplinary Research and Technology. 2026;2(2). doi:10.63891/j-mart.v2i2.208
BibTeX
@article{Aditya2026,
author = {Aditya, Aqil Azmi and Ariyanto},
title = {Production Process of Deep Groove Ball Bearing Type 6201 at PT XYZ},
journal = {Journal of Multidisciplinary Research and Technology},
year = {2026},
volume = {2},
number = {2},
doi = {10.63891/j-mart.v2i2.208}
}
EUVIMED