EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

SMAW Welding of Seamless Pipe Joints for Air Compressor at the Company

Furqon Arrahim, Christofel Jarot Yudaputranto

Journal of Multidisciplinary Research and Technology · 28.07.2026 · 2 (2) · 83-90

DOI: 10.63891/j-mart.v2i2.178 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Multidisciplinary Research and Technology, online erschienen am 28.07.2026. Verfasst von Furqon Arrahim und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

. One of the critical challenges in industrial piping systems is ensuring the strength and reliability of pipe joints, particularly in air compressor installations that operate continuously under high internal pressure. A defective joint in such a system can lead to leakage, structural failure, and costly production downtime, making the choice of welding method and quality-control procedure essential. This study analyzes the Shielded Metal Arc Welding (SMAW) process applied to ASTM A106 Grade B seamless pipe joints during an internship at PT Rafflesia Permata Indonesia, an Engineering, Procurement, and Construction (EPC) company. The research combines direct field observation of welding activities, a review of relevant literature, and interviews with the company's technical personnel to describe how the welding procedure was implemented and controlled. The pipe joints, with a nominal size of 2 inches and a wall thickness of 3.91 mm, were welded following an established Welding Procedure Specification (WPS) using AWS E7016 low-hydrogen electrodes measuring 2.6 mm x 350 mm and an ESAB Buddy Arc 400i welding machine, with a current of approximately 70-80 A and a voltage of 20-25 V. Welding was carried out in the 1G (rotated flat) position, beginning with a root pass, followed by a hot pass and several fill passes. After welding, the joints were cleaned and inspected using visible dye penetrant testing, a Non-Destructive Test (NDT) method capable of revealing surface-breaking discontinuities such as cracks, porosity, and small leaks. The inspection results showed no indication of welding defects, confirming that the joints met the acceptance criteria required for high-pressure air compressor piping. These findings indicate that a properly executed SMAW procedure, supported by correct electrode selection, adequate current control, and systematic NDT inspection, can produce safe and reliable pipe joints for continuous, high-pressure industrial service. Keywords: SMAW, Seamless Pipe, Air Compressor, Non-Destructive Test, E7016 Electrode

Zitieren

APA

Arrahim, F., & Yudaputranto, C. J. (2026). SMAW Welding of Seamless Pipe Joints for Air Compressor at the Company. Journal of Multidisciplinary Research and Technology, 2(2), 83-90. https://doi.org/10.63891/j-mart.v2i2.178

Vancouver

Arrahim F, Yudaputranto CJ. SMAW Welding of Seamless Pipe Joints for Air Compressor at the Company. Journal of Multidisciplinary Research and Technology. 2026;2(2):83-90. doi:10.63891/j-mart.v2i2.178

BibTeX
@article{Arrahim2026,
  author = {Arrahim, Furqon and Yudaputranto, Christofel Jarot},
  title = {SMAW Welding of Seamless Pipe Joints for Air Compressor at the Company},
  journal = {Journal of Multidisciplinary Research and Technology},
  year = {2026},
  volume = {2},
  number = {2},
  pages = {83--90},
  doi = {10.63891/j-mart.v2i2.178}
}
Kostenlos starten →