EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

The Ball Mill Process for Material Breakdown in Cement Production at PT. Solusi Bangun Indonesia Tbk., Narogong, Citeureup, Bogor

Muhammad Roby, Christofel Jarot Yudaputrana

Journal of Multidisciplinary Research and Technology · 25.07.2026 · 2 (2) · 29-37

DOI: 10.63891/j-mart.v2i2.177 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Multidisciplinary Research and Technology, online erschienen am 25.07.2026. Verfasst von Muhammad Roby und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the ball mill grinding process used in cement production at PT. Solusi Bangun Indonesia Tbk. (SBI), located in Narogong, Citeureup, Bogor, Indonesia. As one of the principal machines in the cement manufacturing line, the ball mill crushes and grinds raw materials, namely clinker, gypsum, fly ash, and limestone, into micron-sized powder. Because particle fineness directly affects cement strength, hydration rate, and construction performance, understanding and controlling this grinding stage is essential for maintaining product quality and production efficiency. Although ball mill theory is well documented in the general mineral-processing literature, detailed field-level accounts of how operating parameters such as rotational speed, temperature, and ball-to-material ratio are practically managed on an active cement production line remain limited. This study addresses that gap by describing the actual grinding workflow observed at the SBI Narogong plant. Data were collected through direct field observation, structured interviews with plant supervisors and operators, and a review of relevant literature during a one-month on-site internship. The findings show that the ball mill system operates through two sequential grinding chambers, coarse and fine, supported by a closed-circuit separator and an automated quality-control loop that returns oversized particles for re-grinding until the target fineness, a Blaine specific surface area of approximately 3,200 to 3,500 cm²/g and a particle size of 5 to 15 μm, is reached. Operating temperature is maintained between 60 and 80 degrees Celsius to protect the equipment and preserve product quality. By coordinating rotational speed, grinding-media ratio, material proportion, and temperature control, the process consistently yields cement that meets the SNI 15-2049-2004 and ASTM C150 standards. This study is expected to serve as a practical reference for improving grinding-process efficiency and quality control in similar cement manufacturing operations.

Zitieren

APA

Roby, M., & Yudaputrana, C. J. (2026). The Ball Mill Process for Material Breakdown in Cement Production at PT. Solusi Bangun Indonesia Tbk., Narogong, Citeureup, Bogor. Journal of Multidisciplinary Research and Technology, 2(2), 29-37. https://doi.org/10.63891/j-mart.v2i2.177

Vancouver

Roby M, Yudaputrana CJ. The Ball Mill Process for Material Breakdown in Cement Production at PT. Solusi Bangun Indonesia Tbk., Narogong, Citeureup, Bogor. Journal of Multidisciplinary Research and Technology. 2026;2(2):29-37. doi:10.63891/j-mart.v2i2.177

BibTeX
@article{Roby2026,
  author = {Roby, Muhammad and Yudaputrana, Christofel Jarot},
  title = {The Ball Mill Process for Material Breakdown in Cement Production at PT. Solusi Bangun Indonesia Tbk., Narogong, Citeureup, Bogor},
  journal = {Journal of Multidisciplinary Research and Technology},
  year = {2026},
  volume = {2},
  number = {2},
  pages = {29--37},
  doi = {10.63891/j-mart.v2i2.177}
}
Kostenlos starten →