EUVIMEDEUVIMED entdecken
Crossref

Synthesis and Environmental Evaluation of Hybrid Al₂O₃–CuO Nanofluids for Minimum Quantity Lubrication

Komal S. Moranka, Ravindra R. Deshmukh

Journal of the Textile Association · 01.01.2026 · 86 (05) · 529-533

DOI: 10.63665/jta.v86i5.7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Textile Association, online erschienen am 01.01.2026. Verfasst von Komal S. Moranka und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increased need to join forces on sustainable manufacturing of the environment has enhanced investigations of biodegradable nanofluids to develop further machining methodology like Minimum Quantity Lubrication (MQL). This paper has produced a hybrid nanofluid made of Aluminum Oxide (Al2O3) and Copper Oxide (CuO) nanoparticles in a two-step process by referring to the magnetic stirring and ultrasonic methods, where 1% oleic acid was employed as a dispersing agent and a coconut oil. To assess the compatibility with the environment, BOD, Chemical Oxygen Demand (COD), and the ratio between the two were determined by experiment using standard procedures. The hypothesis tested was the variation of the Al2O3 concentration (0.50, 0.75 and 1.00 vol.%) with equal doses of CuO (0.25 vol.%) to test the three hybrids. The outcomes show that, all the formulations have a BOD/COD ratio of more than 0.5, which confirms their biodegradability. Among them, Hybrid B (0.75% Al2O3 + 0.25% CuO) showed the best balance between biodegradability and formulation performance with BOD of 105 mg/L, COD of 180 mg/L and a BOD/COD ratio of 0.57, which signified that it was highly biodegradable and able to disperse the nanoparticles used. The results prove that the Al2O3-CuO hybrid nanofluids in coconut oil are a promising eco-friendly cutting fluid as an alternative to the traditional mineral-based cutting fluids in a sustainable MQLmachining process.

Zitieren

APA

Moranka, K. S., & Deshmukh, R. R. (2026). Synthesis and Environmental Evaluation of Hybrid Al₂O₃–CuO Nanofluids for Minimum Quantity Lubrication. Journal of the Textile Association, 86(05), 529-533. https://doi.org/10.63665/jta.v86i5.7

Vancouver

Moranka KS, Deshmukh RR. Synthesis and Environmental Evaluation of Hybrid Al₂O₃–CuO Nanofluids for Minimum Quantity Lubrication. Journal of the Textile Association. 2026;86(05):529-533. doi:10.63665/jta.v86i5.7

BibTeX
@article{Moranka2026,
  author = {Moranka, Komal S. and Deshmukh, Ravindra R.},
  title = {Synthesis and Environmental Evaluation of Hybrid Al₂O₃–CuO Nanofluids for Minimum Quantity Lubrication},
  journal = {Journal of the Textile Association},
  year = {2026},
  volume = {86},
  number = {05},
  pages = {529--533},
  doi = {10.63665/jta.v86i5.7}
}
Kostenlos starten →