EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid Precoding with Reconfigurable Intelligent Surfaces for Spectral-Efficient Vehicle-to-Infrastructure Communications in Urban 5G NR Networks

Kavya R Nair, Siddharth B Menon, Ananya T Krishnamurthy, Ravi S Iyer

Journal of Technology Innovation and Society · 30.06.2025 · 3 (2) · 1-21

DOI: 10.63646/jtis.2025.030201 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Technology Innovation and Society, online erschienen am 30.06.2025. Verfasst von Kavya R Nair und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The deployment of fifth-generation New Radio (5G NR) millimetre-wave (mmWave) vehicle-to-infrastructure (V2I) communication systems in urban environments confronts severe path loss, intermittent blockage, and rapid Doppler variation that collectively limit coverage, spectral efficiency, and link reliability. This paper proposes a novel hybrid precoding architecture augmented by a Reconfigurable Intelligent Surface (RIS) panel mounted on building facades to establish and maintain high-throughput V2I links even under non-line-of-sight (NLOS) conditions. The proposed framework jointly optimises the digital baseband precoder, the analogue phase-shifting network, and the RIS phase configuration through an Alternating Optimisation (AO) approach combined with Successive Convex Approximation (SCA) to solve the resulting non-convex problem efficiently. A geometry-based stochastic channel model (GSCM) based on the Saleh-Valenzuela formulation, calibrated to the 3GPP TR 38.901 Urban Micro (UMi) propagation scenario at 28 GHz with 200 MHz bandwidth, is employed for all evaluations under vehicle speeds from 30 to 150 km/h. Simulation results demonstrate that the proposed RIS-assisted hybrid precoding scheme achieves a 2.8x improvement in sum spectral efficiency over hybrid beamforming without RIS at 10 dB SNR, and extends effective V2I coverage radius by 112% at 60 km/h. Moreover, energy efficiency analysis confirms a 3.4x gain over full-MIMO at low-to-medium SNR regimes with only 4 RF chains, validating the suitability of the proposed architecture for green, hardware-efficient intelligent transportation systems (ITS). The convergence of the AO-SCA algorithm is verified analytically and empirically, with consistent convergence within 12 iterations.

Zitieren

APA

Nair, K. R., Menon, S. B., Krishnamurthy, A. T., & Iyer, R. S. (2025). Hybrid Precoding with Reconfigurable Intelligent Surfaces for Spectral-Efficient Vehicle-to-Infrastructure Communications in Urban 5G NR Networks. Journal of Technology Innovation and Society, 3(2), 1-21. https://doi.org/10.63646/jtis.2025.030201

Vancouver

Nair KR, Menon SB, Krishnamurthy AT, Iyer RS. Hybrid Precoding with Reconfigurable Intelligent Surfaces for Spectral-Efficient Vehicle-to-Infrastructure Communications in Urban 5G NR Networks. Journal of Technology Innovation and Society. 2025;3(2):1-21. doi:10.63646/jtis.2025.030201

BibTeX
@article{Nair2025,
  author = {Nair, Kavya R and Menon, Siddharth B and Krishnamurthy, Ananya T and Iyer, Ravi S},
  title = {Hybrid Precoding with Reconfigurable Intelligent Surfaces for Spectral-Efficient Vehicle-to-Infrastructure Communications in Urban 5G NR Networks},
  journal = {Journal of Technology Innovation and Society},
  year = {2025},
  volume = {3},
  number = {2},
  pages = {1--21},
  doi = {10.63646/jtis.2025.030201}
}
Kostenlos starten →