EUVIMEDEUVIMED entdecken
Crossref

Determination of Groundwater Recharge Variation in Sylhet Sadar Upazila Using Water Table Fluctuation Method

Md. Shamim Ahmed

SUST Journal of Science and Technology (SUST JST) · 2020

DOI: 10.63512/sustjst.2020.43 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SUST Journal of Science and Technology (SUST JST), 2020. Verfasst von Md. Shamim Ahmed.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study efforts to determine the variation of groundwater recharge and recharge rate with rainfall in Sylhet Sadar Upazila by water table fluctuation method. Rainfall and groundwater level data of the period 1990-2014 were collected and analyzed. The annual recharge varied from 56.35 mm to 225.19 mm with average of 110.31 mm. The annual groundwater recharge rate for the study period varied from only 1.68% to 5.13% with an average of 2.89% due to lower specific yield. In case of seasonal recharge, it is observed that the recharge was almost twice in monsoon (average 66.64 mm) than the pre-monsoon (average 31.69 mm). In contrast, the recharge rate in comparison with rainfall during the study period showed a higher recharge percentage in pre-monsoon (average 3.20%) than that of the monsoon (average 2.45%). This indicates that there are other factors that influence reasonably on groundwater recharge apart from rainfall.

Zitieren

APA

Ahmed, M. S. (2020). Determination of Groundwater Recharge Variation in Sylhet Sadar Upazila Using Water Table Fluctuation Method. SUST Journal of Science and Technology (SUST JST). https://doi.org/10.63512/sustjst.2020.43

Vancouver

Ahmed MS. Determination of Groundwater Recharge Variation in Sylhet Sadar Upazila Using Water Table Fluctuation Method. SUST Journal of Science and Technology (SUST JST). 2020. doi:10.63512/sustjst.2020.43

BibTeX
@article{Ahmed2020,
  author = {Ahmed, Md. Shamim},
  title = {Determination of Groundwater Recharge Variation in Sylhet Sadar Upazila Using Water Table Fluctuation Method},
  journal = {SUST Journal of Science and Technology (SUST JST)},
  year = {2020},
  doi = {10.63512/sustjst.2020.43}
}
Kostenlos starten →