Research on the Forming Quality of CoCrFeNi-based High Entropy Alloy Coatings Prepared by Laser Cladding
Academic Journal of Emerging Technologies · 2025
DOI: 10.63313/ajet.9004 ↗Kurz gefasst
Fachartikel in der Zeitschrift Academic Journal of Emerging Technologies, 2025. Verfasst von Shukun Liu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study is based on the CoCrFeNi alloy system. By adding alloying elements such as Al, Nb and Ti, and using laser cladding technology for preparation, it aims to optimize the composition design of alloy powders and the parameters of the cladding process.By optimizing the key process parameters such as laser power, scanning speed and powder feeding rate, the forming quality of the clad-ding layer was significantly improved, the generation of pores, cracks and other defects was reduced, and the influence of adding Al, Nb and Ti elements on the forming quality of the alloy was further explored.
Zitieren
APA
Liu, S., Gao, D., & Sun, R. (2025). Research on the Forming Quality of CoCrFeNi-based High Entropy Alloy Coatings Prepared by Laser Cladding. Academic Journal of Emerging Technologies. https://doi.org/10.63313/ajet.9004
Vancouver
Liu S, Gao D, Sun R. Research on the Forming Quality of CoCrFeNi-based High Entropy Alloy Coatings Prepared by Laser Cladding. Academic Journal of Emerging Technologies. 2025. doi:10.63313/ajet.9004
BibTeX
@article{Liu2025,
author = {Liu, Shukun and Gao, Debao and Sun, Rui},
title = {Research on the Forming Quality of CoCrFeNi-based High Entropy Alloy Coatings Prepared by Laser Cladding},
journal = {Academic Journal of Emerging Technologies},
year = {2025},
doi = {10.63313/ajet.9004}
}
EUVIMED