Experimental Investigation on the Mechanism of Cutting Performance Enhancement of YG8N Cemented Carbide Tools with Tesla-Valve-Inspired Micro-Textures under MoS₂-Based Minimum Quantity Lubrication
Academic Journal of Emerging Technologies · 2025
DOI: 10.63313/ajet.2001 ↗Kurz gefasst
Fachartikel in der Zeitschrift Academic Journal of Emerging Technologies, 2025. Verfasst von Jing Li und 1 weiteren Autor:innen. Die Arbeit nennt 9 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
To improve the wear resistance, heat dissipation and anti-adhesion capability of cemented carbide tools in machining titanium alloys, Tesla-valve-inspired ani-sotropic micro-textures were fabricated on the rake face of YG8N cemented car-bide tools using femtosecond laser processing. Cutting experiments were carried out under MoS₂-based hybrid minimum-quantity lubrication (MQL). A tri-axial piezoelectric dynamometer, temperature sensors and surface characterization techniques were employed to systematically compare non-textured tools, for-ward-textured tools and reverse-textured tools at low (300 mm/s) and high (1000 mm/s) cutting speeds in terms of cutting force, friction coefficient, tem-perature distribution, tool wear and chip morphology. The results show that: the micro-textures significantly reduce the actual contact area between the tool and the workpiece and enhance both the storage and transport of cutting fluid, thereby improving lubrication and cooling conditions; at high cutting speeds, the forward-textured tool achieves reductions of about 28.1% in cutting force and 50% in friction coefficient compared with the non-textured tool, lowers the tool-tip temperature by roughly 50% and decreases the wear-band width by about 70%; the micro-textures promote chip curling and evacuation, suppress-ing the formation of built-up edge and adhesion layers and thus markedly ex-tending tool life. This study elucidates the synergistic mechanism of lubrication and heat dissipation by Tesla-valve-inspired micro-textures in enhancing cut-ting performance, and provides both theoretical and experimental support for the design of high-performance cemented carbide cutting tools.
Zitieren
APA
Li, J., & Yang, F. (2025). Experimental Investigation on the Mechanism of Cutting Performance Enhancement of YG8N Cemented Carbide Tools with Tesla-Valve-Inspired Micro-Textures under MoS₂-Based Minimum Quantity Lubrication. Academic Journal of Emerging Technologies. https://doi.org/10.63313/ajet.2001
Vancouver
Li J, Yang F. Experimental Investigation on the Mechanism of Cutting Performance Enhancement of YG8N Cemented Carbide Tools with Tesla-Valve-Inspired Micro-Textures under MoS₂-Based Minimum Quantity Lubrication. Academic Journal of Emerging Technologies. 2025. doi:10.63313/ajet.2001
BibTeX
@article{Li2025,
author = {Li, Jing and Yang, Fazhan},
title = {Experimental Investigation on the Mechanism of Cutting Performance Enhancement of YG8N Cemented Carbide Tools with Tesla-Valve-Inspired Micro-Textures under MoS₂-Based Minimum Quantity Lubrication},
journal = {Academic Journal of Emerging Technologies},
year = {2025},
doi = {10.63313/ajet.2001}
}
EUVIMED