EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Method Verification of Carbon and Sulfur Determination in Ferronickel Tapping Samples Using HCS-801 in Accordance with GB/T 20123

Muh. Azis Albar. J, Muhammad Mattana Anwar, Ardiansah Ardiansah, Mahardika Sandy Ponco, Alexander Malau

Journal of Green Chemical and Environmental Engineering · 2026

DOI: 10.63288/jgcee.v2i1.24 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Green Chemical and Environmental Engineering, 2026. Verfasst von Muh. Azis Albar. J und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reliable determination of carbon (C) and sulfur (S) in tapping ferronickel is critical for metallurgical quality control and compliance with industrial specifications. Given the complex metallic matrix of ferronickel, verification of analytical performance is essential before routine application. This study verifies the GB/T 20123 standard method for the simultaneous determination of carbon and sulfur in tapping ferronickel using a High Carbon Sulfur (HCS-801) combustion–infrared analyzer. Method performance was assessed using accuracy, precision (repeatability), linearity, limit of detection (LOD), and limit of quantification (LOQ), in accordance with internationally accepted validation principles. Evaluation of recovery testing yielded 97.82 % for carbon and 99.04 % for sulfur, both within acceptable recovery ranges. Precision expressed as %RSD was 1.27% for carbon and 0.70% for sulfur, complying with the Horwitz criterion (% RSD < ½ CV Horwitz) and the general acceptance limit of 2 %. Excellent linearity was obtained across the calibration range, with correlation coefficients (r) of 0.998 for carbon and 0.9984 for sulfur. LOD and LOQ values, calculated based on the standard deviation of response and slope of calibration curves, were 0.0557% and 0.1855% for carbon, and 0.0123 % and 0.0409 % for sulfur, respectively. The results demonstrate that the GB/T 20123 method, when implemented with the HCS-801 analyzer, provides reliable analytical performance for carbon and sulfur determination in tapped ferronickel and is suitable for routine industrial applications.

Zitieren

APA

J, M. A. A., Anwar, M. M., Ardiansah, A., Ponco, M. S., & Malau, A. (2026). Method Verification of Carbon and Sulfur Determination in Ferronickel Tapping Samples Using HCS-801 in Accordance with GB/T 20123. Journal of Green Chemical and Environmental Engineering. https://doi.org/10.63288/jgcee.v2i1.24

Vancouver

J MAA, Anwar MM, Ardiansah A, Ponco MS, Malau A. Method Verification of Carbon and Sulfur Determination in Ferronickel Tapping Samples Using HCS-801 in Accordance with GB/T 20123. Journal of Green Chemical and Environmental Engineering. 2026. doi:10.63288/jgcee.v2i1.24

BibTeX
@article{J2026,
  author = {J, Muh. Azis Albar. and Anwar, Muhammad Mattana and Ardiansah, Ardiansah and Ponco, Mahardika Sandy and Malau, Alexander},
  title = {Method Verification of Carbon and Sulfur Determination in Ferronickel Tapping Samples Using HCS-801 in Accordance with GB/T 20123},
  journal = {Journal of Green Chemical and Environmental Engineering},
  year = {2026},
  doi = {10.63288/jgcee.v2i1.24}
}
Kostenlos starten →