EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Using The Taguchi Technique To Examine Concrete Durability By Applying Forta, Polyester, And Micro Silica Fibers In Freeze-Thaw Cycles

Milad Khodaparast, Omid Kohnehpooshi, Mohammad Hemen Jannaty

Metallurgical and Materials Engineering · 12.12.2024 · 30 (4) · 786-796

DOI: 10.63278/mme.v30i4.1870 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical and Materials Engineering, online erschienen am 12.12.2024. Verfasst von Milad Khodaparast und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The goal of this study was to examine the durability of concrete using Forta, polyester, and micro-silica fibers against freeze-thaw cycles by employing the Taguchi technique. To this end, the experimental Taguchi technique was employed to achieve an optimum mix design with certain percentages of fibers and micro-silica, as following a 28-day age, [concrete] cubic specimens were subjected to 50 freezing and thawing cycles. These specimens were then compared to conventionally cured concrete at ambient temperature. As indicated by the National Mix Design, compressive strength experiments were conducted in line with the ISIRI 3206 Regulation, and the Brazilian Tensile Strength experiment followed the ASTM C496. For each experiment, 6 concrete specimens with fibers and admixtures and 6 more without fibers and admixtures were fabricated and then compared. As revealed by the findings, to test compressive strength in the C25 Mode, the simultaneous use of both Forta (Forta= 1.5) and polyester (Polyester= 3) fibers at the highest level, i.e., in Specimen No. 4, exhibited a significant increase in compressive strength. Also, to test tensile strength in the C25 Mode, the simultaneous use of both Forta (Forta= 1.5) and polyester (Polyester= 3) fibers at the highest level, i.e., in Specimen No. 4, exhibited a good increase in tensile strength.

Zitieren

APA

Khodaparast, M., Kohnehpooshi, O., & Jannaty, M. H. (2024). Using The Taguchi Technique To Examine Concrete Durability By Applying Forta, Polyester, And Micro Silica Fibers In Freeze-Thaw Cycles. Metallurgical and Materials Engineering, 30(4), 786-796. https://doi.org/10.63278/mme.v30i4.1870

Vancouver

Khodaparast M, Kohnehpooshi O, Jannaty MH. Using The Taguchi Technique To Examine Concrete Durability By Applying Forta, Polyester, And Micro Silica Fibers In Freeze-Thaw Cycles. Metallurgical and Materials Engineering. 2024;30(4):786-796. doi:10.63278/mme.v30i4.1870

BibTeX
@article{Khodaparast2024,
  author = {Khodaparast, Milad and Kohnehpooshi, Omid and Jannaty, Mohammad Hemen},
  title = {Using The Taguchi Technique To Examine Concrete Durability By Applying Forta, Polyester, And Micro Silica Fibers In Freeze-Thaw Cycles},
  journal = {Metallurgical and Materials Engineering},
  year = {2024},
  volume = {30},
  number = {4},
  pages = {786--796},
  doi = {10.63278/mme.v30i4.1870}
}
Kostenlos starten →