EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating the Temporal Stability of 3D-Printed PLA Samples under Ambient Storage Conditions

İsmail Özsoykal, Ayşegül Yurt, Mustafa Alper Selver

Advances in Medical Pyhsics and Applied Sciences · 2025

DOI: 10.63187/ampas.31 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Medical Pyhsics and Applied Sciences, 2025. Verfasst von İsmail Özsoykal und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This study aims to evaluate the longitudinal radiological stability of 3D-printed PLA-based materials under ambient storage conditions, with varying infill densities and flow rates, in order to understand the impact of these factors on their use in medical imaging and radiation therapy. Methodology: Twenty-five cylindrical samples were 3D printed using three PLA-based filaments (Lightweight PLA, Premium PLA, and StoneFil), with varying infill densities and flow rates. The samples were stored in ambient room conditions, and their radiological properties were measured over a 6-month period using CT scans. Hounsfield Unit (HU) values were analyzed using a leave-one-out approach and linear regression analysis to assess temporal stability and the relationship between printing parameters and HU values.

Findings

The results demonstrated minimal variations in HU values, with most measurements falling within the limits of agreement, indicating stable radiological properties across all filament types. A strong linear correlation was observed between printing parameters and HU values (R² > 0.99).

Conclusion

The study confirms the stability of 3D-printed PLA-based materials in typical environmental conditions over a 6-month period. These findings support the use of 3D-printed phantoms in medical applications, although further research is needed to explore the effects of UV exposure, higher levels of humidity, and other environmental factors on long-term material stability.

Zitieren

APA

Özsoykal, İ., Yurt, A., & Selver, M. A. (2025). Investigating the Temporal Stability of 3D-Printed PLA Samples under Ambient Storage Conditions. Advances in Medical Pyhsics and Applied Sciences. https://doi.org/10.63187/ampas.31

Vancouver

Özsoykal İ, Yurt A, Selver MA. Investigating the Temporal Stability of 3D-Printed PLA Samples under Ambient Storage Conditions. Advances in Medical Pyhsics and Applied Sciences. 2025. doi:10.63187/ampas.31

BibTeX
@article{zsoykal2025,
  author = {Özsoykal, İsmail and Yurt, Ayşegül and Selver, Mustafa Alper},
  title = {Investigating the Temporal Stability of 3D-Printed PLA Samples under Ambient Storage Conditions},
  journal = {Advances in Medical Pyhsics and Applied Sciences},
  year = {2025},
  doi = {10.63187/ampas.31}
}
Kostenlos starten →